asterisk users - Nov 2004 - ZT_CHANCONFIG failed on channel 1: No

>>> I bought a Wildcard TDM400P earlier this week.
>>>
>>> I compiled the software from CVS and installed it.  When ztcfg runs
I
>>> get
>>> the error:
>>>
>>> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>>>
>>> After checking /proc/pci I don't see the board.  Why
wouldn't the
>>> board be
>>> showing up?  Its in a slightly older machine (with an i440BX
chipset)
>>> that
>>> any other PCI card I have works fine in.  My brand new desktop sees
>>> it.
>>>
>>> Any ideas?
>>
>> Have to ask the obvious: Is the power connector plugged in?  Actually,
>> I think the card should show up even if it's not plugged in,
though.
>> Other questions: Is the motherboard PCI 2.2 compliant?  I don't
think
>> the TDM boards work with 2.1 or earlier.  Have you tried it in other
>> PCI slots?  Do you have any other machines to test it in?
>
> Yes to power connecter being plugged in, PCI 2.2, and tried other 
> slots.
>
> I have tried the board in a brand new machine (that I can't use for
> asterisk) and windows finds the card.
Hmm, well that complicates things.  I might try one of those Linux Live 
CD's (the kind that boot up to a functional version of Linux without 
affecting the hard drive: see http://www.knoppix.org/) on the newer 
windows machine.  If that machine can find the card under linux, you 
can narrow the problem down to a bad install of linux, or some kind of 
hardware incompatibility/conflict.

Other question:  Are there any other PCI cards or integrated 
peripherals in the 440BX machine?  The TDM400P's don't seem to like to 
share IRQ's.  Maybe you can use the BIOS to reserve an IRQ.

Well, I just swapped around some motherboards and it now comes up
correctly!!!!  Yeah!!!

Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
 
           1 WCTDM/0/0 FXOKS
           2 WCTDM/0/1 FXOKS
           3 WCTDM/0/2 FXOKS
           4 WCTDM/0/3 FXOKS

Thanks all!!

Incidently, I'm using the exact same chipset (i440bx).  The bios just
sucked eggs.

Thanks,

Rob

On Thu, 2004-11-11 at 13:26, Noah Miller wrote:
> >>> I bought a Wildcard TDM400P earlier this week.
> >>>
> >>> I compiled the software from CVS and installed it.  When ztcfg
runs I
> >>> get
> >>> the error:
> >>>
> >>> ZT_CHANCONFIG failed on channel 1: No such device or address
(6)
> >>>
> >>> After checking /proc/pci I don't see the board.  Why
wouldn't the
> >>> board be
> >>> showing up?  Its in a slightly older machine (with an i440BX
chipset)
> >>> that
> >>> any other PCI card I have works fine in.  My brand new desktop
sees
> >>> it.
> >>>
> >>> Any ideas?
> >>
> >> Have to ask the obvious: Is the power connector plugged in? 
Actually,
> >> I think the card should show up even if it's not plugged in,
though.
> >> Other questions: Is the motherboard PCI 2.2 compliant?  I
don't think
> >> the TDM boards work with 2.1 or earlier.  Have you tried it in
other
> >> PCI slots?  Do you have any other machines to test it in?
> >
> > Yes to power connecter being plugged in, PCI 2.2, and tried other 
> > slots.
> >
> > I have tried the board in a brand new machine (that I can't use
for
> > asterisk) and windows finds the card.
> 
> Hmm, well that complicates things.  I might try one of those Linux Live 
> CD's (the kind that boot up to a functional version of Linux without 
> affecting the hard drive: see http://www.knoppix.org/) on the newer 
> windows machine.  If that machine can find the card under linux, you 
> can narrow the problem down to a bad install of linux, or some kind of 
> hardware incompatibility/conflict.
> 
> Other question:  Are there any other PCI cards or integrated 
> peripherals in the 440BX machine?  The TDM400P's don't seem to like
to
> share IRQ's.  Maybe you can use the BIOS to reserve an IRQ.