asterisk users - Nov 2004 - ZT_CHANCONFIG failed on channel 1: No such device or address (6)

I bought a Wildcard TDM400P earlier this week.

I compiled the software from CVS and installed it.  When ztcfg runs I get
the error:

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

After checking /proc/pci I don't see the board.  Why wouldn't the board
be
showing up?  Its in a slightly older machine (with an i440BX chipset) that
any other PCI card I have works fine in.  My brand new desktop sees it.

Any ideas?

Thanks,

Rob

> I bought a Wildcard TDM400P earlier this week.
>
> I compiled the software from CVS and installed it.  When ztcfg runs I 
> get
> the error:
>
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>
> After checking /proc/pci I don't see the board.  Why wouldn't the 
> board be
> showing up?  Its in a slightly older machine (with an i440BX chipset) 
> that
> any other PCI card I have works fine in.  My brand new desktop sees it.
>
> Any ideas?
Have to ask the obvious: Is the power connector plugged in?  Actually, 
I think the card should show up even if it's not plugged in, though.
Other questions: Is the motherboard PCI 2.2 compliant?  I don't think 
the TDM boards work with 2.1 or earlier.  Have you tried it in other 
PCI slots?  Do you have any other machines to test it in?

Rob Emanuele wrote:
> I bought a Wildcard TDM400P earlier this week.
> 
> I compiled the software from CVS and installed it.  When ztcfg runs I get
> the error:
> 
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> 
> After checking /proc/pci I don't see the board.  Why wouldn't the
board be
> showing up?  Its in a slightly older machine (with an i440BX chipset) that
> any other PCI card I have works fine in.  My brand new desktop sees it.
> 
> Any ideas?
> 
did you remember to plug in the power supply to the card?

flynn