I have purchased an Adit 600 but with 6 FXS 8 channel cards. Can somone tell me where I plug analog phones in. The cards do not have any ports on them. Thanks Richard __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com
> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Richard Reina > Sent: Wednesday, November 10, 2004 3:27 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Hooking up a an Adit 600 > > I have purchased an Adit 600 but with 6 FXS 8 channel > cards. Can somone tell me where I plug analog phones > in. The cards do not have any ports on them.You can get an amphenol 25 pair cable and connect it to a punchdown block that also has an amphenol connector. From there you can then punch down phone jacks. - B
Thank you very much for your response. I was
wondering if it would be ok for me to ask you a couple
of additional questions.
1. Do you think this woul work?
http://www.phonegeeks.com/patpanwit25p.html
2. If I use the 25 pair ("Amphenol") for hooking up
analog phones, what ports on the ADIT 600 do I use for
hooking up my eight analog incoming phone lines?
Thanks again for your help.
If my questions are unclear (not suprising since I am
completely clueless) feel free to call me toll free at
888-448-7874.
Richard Reina.
--- Brent Franks <mwless@mindworks.net> wrote:
> > -----Original Message-----
> > From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-
> > bounces@lists.digium.com] On Behalf Of Richard
> Reina
> > Sent: Wednesday, November 10, 2004 3:27 PM
> > To: asterisk-users@lists.digium.com
> > Subject: [Asterisk-Users] Hooking up a an Adit 600
> >
> > I have purchased an Adit 600 but with 6 FXS 8
> channel
> > cards. Can somone tell me where I plug analog
> phones
> > in. The cards do not have any ports on them.
>
> You can get an amphenol 25 pair cable and connect it
> to a punchdown
> block that also has an amphenol connector. From
> there you can then
> punch down phone jacks.
>
> - B
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit:
>
>
http://lists.digium.com/mailman/listinfo/asterisk-users>
__________________________________
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
Richard Reina wrote:>Thank you very much for your response. I was >wondering if it would be ok for me to ask you a couple >of additional questions. > >1. Do you think this woul work? > >http://www.phonegeeks.com/patpanwit25p.html > >yes, but be certain you are ordering the 2-conductor jack model.>2. If I use the 25 pair ("Amphenol") for hooking up >analog phones, what ports on the ADIT 600 do I use for >hooking up my eight analog incoming phone lines? > >You need to replace one of your FXS cards with an FXO card for your incoming lines from the telephone company. They are more expensive. :(>Thanks again for your help. > >If my questions are unclear (not suprising since I am >completely clueless) feel free to call me toll free at > >888-448-7874. > >Richard Reina. > > >