asterisk users - Nov 2004 - Marconi Sys X/TE410P configuration

Has anyone got a working config for a Marconi System X (Q.931) and
Digium TE410P?


Steve

-- 
NetTek Ltd Phone/Fax +44-(0)20 7483 2455
SMS steve-epage (at) gbnet.net [body] gpg 1024D/468952DB 2001-09-19

Hi Steve-

Just wanted to make sure that you're aware of an earlier post regarding
problems with Marconi, by Darren Storer I think:

Here it is:

"Are you sure that NTL have provided you with a true Q.931 EuroISDN PRI
circuit? If the circuit was supplied some time ago for use with existing
equipment it may not be fully EuroISDN compliant. When connecting to Telcos
that use Marconi (GPT) System X switches you must make sure that the circuit
is using ISDN 110 and not ISDN 85. ISDN 85 is an older implementation of
Q.931 in the UK and it does not work with Asterisk E100P or TE410P in my
experience. When checking with NTL ask if your circuit is ISDN 110 or Q.931e
or ETSI; these are the three names that are commonly used by UK carriers for
full spec. EuroISDN PRI. "

Regards
Scott Stingel 


Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Kennedy
Sent: Tuesday, November 09, 2004 6:05 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Marconi Sys X/TE410P configuration

Has anyone got a working config for a Marconi System X (Q.931) and Digium
TE410P?


Steve

--
NetTek Ltd Phone/Fax +44-(0)20 7483 2455 SMS steve-epage (at) gbnet.net
[body] gpg 1024D/468952DB 2001-09-19
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Hi Steve,

On Tue, 9 Nov 2004 14:05:18 +0000, Steve Kennedy
<steve-asterisk@gbnet.net> wrote:
> Has anyone got a working config for a Marconi System X (Q.931) and
> Digium TE410P?
> 
Check out the quote that Scott posted from an earlier listing. If you
are sure that you have EuroISDN/ETSI circuits from the System X switch
I can post sample configs for TE410P (although they should already be
somewhere in the mailing list archives...).

TE410P works well with System X; if you give us a clue as to which
carrier you will be connecting via I might be able to offer additional
advice on CLI propagation etc.

HTH

Darren
-- 
Darren Storer
Comgate
Telco|Internet|Broadcast