asterisk users - Nov 2004 - Asterisk's Fails to start!

hi,
I am using TDM400 with FXS and FXO modules,everytime i run asterisk and 
looking asterisk log i found following errors:
parse error: No category context for line 96 of extensions.conf
Requested contexts didn't get merged

Also asterisk not run just initialize and freezes and the log shows 
above description.
my configs are:
zaptel.conf
fxoks=1
fxsks=4
loadzone=us
defaultzone=us

zapata.conf
[channels]
signalling=fxo_ks
context=outgoing
channel => 1

signalling=fxs_ks
context=incoming
channel => 4


extensions.conf
[incoming]
exten => s,1,Dial,Zap/1

[outgoing]
exten => _0NXXXXXX,1,Dial/1/${EXTEN:1}

I am a newbie so don't be bothering with my configuration.
kindly pointout my mistakes/errors and helping me out.

On Wed, 2004-11-03 at 22:40 +0500, Adnan Ahmed wrote:
> hi,
> I am using TDM400 with FXS and FXO modules,everytime i run asterisk and 
> looking asterisk log i found following errors:
> parse error: No category context for line 96 of extensions.conf
> Requested contexts didn't get merged
Well without your config file I would bet you haven't defined a context
before line 96 where you start some exten => line.

-- 
Steven Critchfield <critch@basesys.com>

I believe your problem is on the outgoing dial line.  You Need an outgoing
channel defined, and a comma or parentheses for your dial command.

[outgoing]
exten => _0NXXXXXX,1,Dial,Zap/1/${EXTEN:1}

Calvin Morrow

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Adnan Ahmed
Sent: Wednesday, November 03, 2004 10:40 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Asterisk's Fails to start!

hi,
I am using TDM400 with FXS and FXO modules,everytime i run asterisk and looking
asterisk log i found following errors:
parse error: No category context for line 96 of extensions.conf Requested
contexts didn't get merged

Also asterisk not run just initialize and freezes and the log shows above
description.
my configs are:
zaptel.conf
fxoks=1
fxsks=4
loadzone=us
defaultzone=us

zapata.conf
[channels]
signalling=fxo_ks
context=outgoing
channel => 1

signalling=fxs_ks
context=incoming
channel => 4


extensions.conf
[incoming]
exten => s,1,Dial,Zap/1

[outgoing]
exten => _0NXXXXXX,1,Dial/1/${EXTEN:1}

I am a newbie so don't be bothering with my configuration.
kindly pointout my mistakes/errors and helping me out.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users