Hello!
I'm trying to install Zaptel module so I can run a X100P clone (Intel 537,
MD 3200) as an FXO interface.
The problem is that after compilling and installing (successfull, aparently)
I can't load the module.
I tried (almost) every tip I was able to find on Google, Voip-Info and this
mailing-list, no success until now.
Anyone here got lucky with that? I hope so...
Running system is an old AMD 500Mhz with 64MB RAM on SuSE Linux 8.2 (no
plans to upgrade unless extremely necessary) with most packages updated.
Thanks in advance,
-Dhennys
woody sources/zaptel-1.0.2# uname -a
Linux woody 2.4.20-4GB #1 Tue Aug 10 10:44:07 UTC 2004 i586 unknown unknown
GNU/Linux
woody sources/zaptel-1.0.2#
woody sources/zaptel-1.0.2# ztcfg -vv
Zaptel Configuration
=====================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Notice: Configuration file is /etc/zaptel.conf
line 145: Unable to open master device '/dev/zap/ctl'
woody sources/zaptel-1.0.2#
woody sources/zaptel-1.0.2# lspci -vv
00:0a.0 Communication controller: Tiger Jet Network Inc. Intel 537
Subsystem: Intel Corp.: Unknown device 0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
woody sources/zaptel-1.0.2# lsmod | grep 537
Intel537 3695396 1
woody sources/zaptel-1.0.2# cat /proc/interrupts
CPU0
0: 621189 XT-PIC timer
1: 4 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC usb-ohci
8: 2 XT-PIC rtc
9: 1 XT-PIC acpi
10: 611199 XT-PIC 537
11: 72090 XT-PIC eth0
14: 96205 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
MIS: 0
woody sources/zaptel-1.0.2#
woody sources/zaptel-1.0.2# modprobe zaptel
/lib/modules/2.4.20-4GB/misc/zaptel.o: couldn't find the kernel version the
module was compiled for
/lib/modules/2.4.20-4GB/misc/zaptel.o: insmod
/lib/modules/2.4.20-4GB/misc/zaptel.o failed
/lib/modules/2.4.20-4GB/misc/zaptel.o: insmod zaptel failed
woody sources/zaptel-1.0.2#