I can't find anything in the archives or wiki that can help me with this
installation issue.
Just got a TDM22B. zaptel and asterisk checked out, compiled and installed
OK on Slackware 9.1 with custom kernel 2.4.25.
BIOS has "Plug & Play OS Installed" set to "No".
Everything else related
to IRQs is "auto".
root@winchester:~# modprobe wcfxs
/lib/modules/2.4.25/misc/wcfxs.o: init_module: No such device
/lib/modules/2.4.25/misc/wcfxs.o: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.25/misc/wcfxs.o: insmod /lib/modules/2.4.25/misc/wcfxs.o
failed
/lib/modules/2.4.25/misc/wcfxs.o: insmod wcfxs failed
root@winchester:~# cat /proc/interrupts
CPU0
0: 4788 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
11: 435 XT-PIC eth0
14: 3112 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
root@winchester:~# dmesg
Zapata Telephony Interface Registered on major 196
Zapata Telephony Interface Unloaded
/proc/pci does not have an entry attributable to the TDM card. I have
tried moving the card to a different PCI slot to no avail. If further
information is needed, please let me know. I have no idea what else to try
at this point.
--
Tom