Ronald Hartmann
2004-Nov-04 13:51 UTC
[Asterisk-Users] RE: ZapTel problems ***** Problem solved *****
That darn signaling issue Grrrrr Anyways...... I Must recall that FXO ports get FXS signaling And vice versa. -----Original Message----- From: Ronald Hartmann [mailto:RHartmann@nnamtraH.com] Sent: Thursday, November 04, 2004 3:18 PM To: asterisk-users@lists.digium.com Subject: FW: ZapTel problems Good Day, Well I had the box up and running accepting an incoming pstn line. Then made a change to the zap conf file and now asterisk will not start 001?Had the box up and running 002?went to change the zapata.conf to include my pstn lines 003?and then rebooted and asterisk will not load. 004? 005?Not sure if it is a co-incidence or not 006? 007? 008?my "zapata.conf" file 009? 010?[channels] 011?language=en 012? 013?context=from-pstn 014?signalling=fxs_ks 015?faxdetect=incoming 016?usecallerid=yes 017?echocancel=yes 018?echocancelwhenbridged=no 019?echotraining=800 020?group=0 021?channel=1 022?channel=2 023? 024?context=default 025?signalling=fxo_ks 026?channel=3 027?channel=4 028? 029? 030? 031?Zaptel Configuration 032?=====================033? 034? 035?4 channels configured. 036? 037? 038?Nov 5 13:50:14 pc-11 kernel: Zapata Telephony Interface Registered on major 196 039?Nov 5 13:50:17 pc-11 kernel: Freshmaker version: 71 040?Nov 5 13:50:17 pc-11 kernel: Freshmaker passed register test 041?Nov 5 13:50:17 pc-11 kernel: Module 0: Installed -- AUTO FXS/DPO 042?Nov 5 13:50:17 pc-11 kernel: Module 1: Installed -- AUTO FXS/DPO 043?Nov 5 13:50:17 pc-11 kernel: Module 2: Installed -- AUTO FXO (FCC mode) 044?Nov 5 13:50:17 pc-11 kernel: Module 3: Installed -- AUTO FXO (FCC mode) 045?Nov 5 13:50:17 pc-11 kernel: Found a Wildcard TDM: Wildcard TDM400P REV H (4 modules) 046? 047? 048?when i start asterisk -vvvvvc 049? [chan_phone.so] => (Linux Telephony API Support) 050? == Parsing '/etc/asterisk/phone.conf': Found 051? == Registered channel type 'Phone' (Standard Linux Telephony API Driver) 052? [chan_zap.so] => (Zapata Telephony w/PRI) 053? == Parsing '/etc/asterisk/zapata.conf': Found 054? == Unregistered channel type 'Tor' 055? == Unregistered channel type 'Zap' 056?[root@pc-11 asterisk]# Ouch ... error while writing audio data: : Broken pipe 057? 058? 059?Not sure where to go is this a zap issue or is it a co-incidence? 060? Any idea what I should have in my config file for a single digium 4 port card with 2 fxo and 2 fxs thanks