asterisk users - Nov 2004 - X100P & Analog PBX - not RING and not answer

Hi,

I connect a X100p in a Analog PBX extension.

If I want to call a analog extension (e.g.: using a softphone), the 
asterisk pick up the extension and dial perfectly.
If I call the extension where where the X100Pp is connected (inside the 
company), the asterisk doesn't answer the call.

I do: modprobe wcfxo debug=1 opermode=1

This message repeats lot of times:
Setting hook state to 0 (0a)

But in syslog, I don't see the "RING!" and "NO RING!"
messages.
This is the outputs of the ztmonitor and audacity:
http://www.ad2.com.br/asterisk/teste.wav.bz2
http://www.ad2.com.br/asterisk/teste.png.bz2

And the state of Zap channels is always offhook:

*CLI> zap show channel 1
Channel: 1
(...)
InAlarm: 0
Signalling Type: FXS Kewlstart
(...)
Actual Hookstate: Offhook

If I disconnect the cable of the board, the hookstate changes to onhook.
I made a lot of tests with tx and rx gain w/o success.

Thanks for any help.

Alexandre Arruda Paes

Hi again,

I solve my problem...
Puting some debugs in wcfxo a discover that MINPEGTIME is too high to 
capture the rings from PBX. Reducing your value, everything is functions 
perfectly.

Alexandre


alexandre::aldeia digital wrote:
> Hi,
> 
> I connect a X100p in a Analog PBX extension.
> 
> If I want to call a analog extension (e.g.: using a softphone), the 
> asterisk pick up the extension and dial perfectly.
> If I call the extension where where the X100Pp is connected (inside the 
> company), the asterisk doesn't answer the call.
> 
> I do: modprobe wcfxo debug=1 opermode=1
> 
> This message repeats lot of times:
> Setting hook state to 0 (0a)
> 
> But in syslog, I don't see the "RING!" and "NO
RING!" messages.
> This is the outputs of the ztmonitor and audacity:
> http://www.ad2.com.br/asterisk/teste.wav.bz2
> http://www.ad2.com.br/asterisk/teste.png.bz2
> 
> And the state of Zap channels is always offhook:
> 
> *CLI> zap show channel 1
> Channel: 1
> (...)
> InAlarm: 0
> Signalling Type: FXS Kewlstart
> (...)
> Actual Hookstate: Offhook
> 
> If I disconnect the cable of the board, the hookstate changes to onhook.
> I made a lot of tests with tx and rx gain w/o success.
> 
> Thanks for any help.
> 
> Alexandre Arruda Paes
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users