Hello,
I have installed and configured the devel kit card with latest CVS
drivers. What I start Asterisk in -vvvc mode, the last line is
WARNING[2412]: chan_zap.c:1323 zt_set_hook: zt hook failed: Device or
resource busy
-- Starting simple switch on 'Zap/1-1'
I have rebooted the computer and am bringing up the modules manually
I am doing a
modprobe wcfxs
Modprobe wcfxo
Is there anything else I need to do? When I ring in the line is picked
up with just static. Nothing in the asterisks logs indicates it knows
it picked up the line.
Any ideas?
Cheers
Cian
----- Original Message -----
From: "Cian O'Sullivan" <cosullivan@icsbermuda.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Tuesday, November 02, 2004 6:26 PM
Subject: [Asterisk-Users] FXO devel Kit Card
Hello,
I have installed and configured the devel kit card with latest CVS
drivers. What I start Asterisk in -vvvc mode, the last line is
WARNING[2412]: chan_zap.c:1323 zt_set_hook: zt hook failed: Device or
resource busy
-- Starting simple switch on 'Zap/1-1'
I have rebooted the computer and am bringing up the modules manually
I am doing a
modprobe wcfxs
Modprobe wcfxo
Is there anything else I need to do? When I ring in the line is picked
up with just static. Nothing in the asterisks logs indicates it knows
it picked up the line.
Any ideas?
Cheers
Cian
-- Starting simple switch on 'Zap/1-1'
means it picked up the line.
Hello
-- Starting simple switch on 'Zap/1-1'
means it picked up the line.
My problem is that when I dial in, the card answers the call, but only
leaves static, and there is nothing in the asterisk CLI or logs to
indicate that it did pick up the line.
I don't understand what "device busy" referes to either.
Any pointers?
Cheers
Cian
----- Original Message -----
From: "Cian O'Sullivan" <cosullivan@icsbermuda.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Tuesday, November 02, 2004 6:26 PM
Subject: [Asterisk-Users] FXO devel Kit Card
Hello,
I have installed and configured the devel kit card with latest CVS
drivers. What I start Asterisk in -vvvc mode, the last line is
WARNING[2412]: chan_zap.c:1323 zt_set_hook: zt hook failed: Device or
resource busy
-- Starting simple switch on 'Zap/1-1'
I have rebooted the computer and am bringing up the modules manually
I am doing a
modprobe wcfxs
Modprobe wcfxo
Is there anything else I need to do? When I ring in the line is picked
up with just static. Nothing in the asterisks logs indicates it knows
it picked up the line.
Any ideas?
Cheers
Cian
-- Starting simple switch on 'Zap/1-1'
means it picked up the line.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
> I have installed and configured the devel kit card with latest CVS > drivers. What I start Asterisk in -vvvc mode, the last line is > > WARNING[2412]: chan_zap.c:1323 zt_set_hook: zt hook failed: Device or > resource busy > -- Starting simple switch on 'Zap/1-1' > > I have rebooted the computer and am bringing up the modules manually > > I am doing a > > modprobe wcfxs > Modprobe wcfxo > > Is there anything else I need to do?ztcfg -vv