asterisk users - Nov 2004 - anyone got a 7910 to work with asterisk?

I've looked all over but can't find anything about the 7910.

Mark

-- 

Mark Phillips, G7LTT/KC2ENI
Randolph, NJ

Mark,
  The 7910 support in the native chan_skinny works pretty well.  You will
only get basic call features.. No Hold, speed dial, transfer, etc.  There is
another project for chan_sccp.  It seems to add many more features.
Personally, I use the chan_skinny because it is more stable.  with
chan_sccp, I could easily kill the asterisk server.  With chan_skinny, it
hasn't rebooted once.
  I had to setup a TFTP server with the following files:

XMLDefault.cnf.xml : Containing
<Default>
<callManagerGroup>
<members>
<member  priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
</ports>
<processNodeName>192.168.200.75</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<loadInformation6  model="IP Phone
7910">P00405000600</loadInformation6>
<loadInformation124  model="Addon
7914"></loadInformation124>
<loadInformation9  model="IP Phone
7935"></loadInformation9>
<loadInformation8  model="IP Phone
7940">P00303020214</loadInformation8>
<loadInformation7  model="IP Phone
7960">P00303020214</loadInformation7>
<loadInformation20000  model="IP Phone
7905"></loadInformation20000>
<loadInformation30008  model="IP Phone
7902"></loadInformation30008>
<loadInformation30007  model="IP Phone
7912"></loadInformation30007>
</Default>


You will need to change the processNodeName for your Asterisk Server.  Also,
the loadInformaiton6 must match your version of your phone, or your image if
you have cisco access.

With the DHCP server telling the phone to use your TFTP server, you should
get your phone trying to hit the asterisk server.

On the asteirsk server, you need to modify the skinny.conf file in the
/etc/asterisk directory.
skinny.conf : Containing
[general]
port = 2000             ; Port to bind to, default tcp/2000
bindaddr = 192.168.200.75       ; Address to bind to
dateFormat = M-D-Y      ; M,D,Y in any order (5 chars max)
keepAlive = 120

; Typical config for a 7910
[cisco1]                ; Device name
device=SEPXXXXXXXXXX  ; Offical identifier  # NEed to set to your ID
;version=P002F202       ; Firmware version identifier
;host=192.168.1.144     ;
;permit=192.168.0/24    ; Optional, used for authentication
nat=0
callerid="Your Name" <xxx-xxx-xxxx>
mailbox=1000
callwaiting=0
transfer=1
threewaycalling=0
context=longdistance
line => 301             ; Dial(Skinny/301@cisco1)

There are lots of resources on the voip-info.org website.  Should be able to
give you lots of pointers...

Joel Berry


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Mark
Phillips
Sent: Tuesday, November 02, 2004 2:44 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] anyone got a 7910 to work with asterisk?


I've looked all over but can't find anything about the 7910.

Mark

--

Mark Phillips, G7LTT/KC2ENI
Randolph, NJ