asterisk users - Nov 2004 - User problem

The user is me !
I decided to try out *, and installed the xorcom Rapid installation
With the help of the wiki and reading posts on this list, I have got to 
the stage where I have got an internal pbx, and able to dial out
and receive calls.

I am know trying to incorporate one analog line into the system.

I have a x100P.
If  I use the Rapid front end and look in zttools, the X100p is showing 
as a RED alarm. Don't know if that has anything to do with my problem

ztcfg reports
Channel 01 : FXS Kewlstart (Default) (Slaves : 01)
1 Channel{s) configured.

Zaptel.conf
    fxsks=1
    (loadzone and default zone stuff)

Zapata.conf
    signalling = fxs_ks
    Channel => 1

If  Channel=>1 is  changed to ;Channel =>1, Asterisk loads ok
However, when Channel =>1 is enabled, asterisk won't start

Gives following errors
ERROR[16384]: chan_zap.c: 6181 mkintf : Unable to get parameters
ERROR[16384]: chan_zap.c :9109 setup_zap : Unable to register channel
'1'
WARNING[16384] : loader.c:334 ast_load_resource : Chan_zap.so :
              load_module failed, returning -1
             Unregistered channel type 'Tor'
             Unregistered channel type 'Zap'

So what have I done wrong, or not done ??
Thanks for reading

-- 
Clive

Email	: clive.carter@sbcs.co.uk
    Alt	: clivecarter@orange.net
Tel	: 0845 0043366
    Alt	: 01952 402032
SIP	: 84416002@voiptalk.org
Mobile	: 07970 856261

Clive Carter wrote:

<snip>
> Gives following errors
> ERROR[16384]: chan_zap.c: 6181 mkintf : Unable to get parameters
> ERROR[16384]: chan_zap.c :9109 setup_zap : Unable to register channel
'1'
> WARNING[16384] : loader.c:334 ast_load_resource : Chan_zap.so :
>              load_module failed, returning -1
>             Unregistered channel type 'Tor'
>             Unregistered channel type 'Zap'
> 
It looks like your box can't load the appropriate drivers. How are you 
loading the drivers?

you need to have both the zaptel and wcfxo drivers loaded in order to 
use the card. make sure both are loaded before starting up asterisk. you 
can verify it by running the "dmesg" command and looking in the output
for stuff related to Zaptel or wcfxo.

also there might be IRQ issues - is the card sharing IRQs with anything 
else?

flynn