Simon,
I bought the Conceptronic ISDN PCI Card . Linux reports the card as a
Dynalink 6692 PCI
It looks like it*s suitable for the isdn4linux drivers. I*m still trying
to configure it. Incoming calls are working but I*m still fighting for
outgoing calls with this card.
If you have AVM or EIcon card close maybe you can get better support
from the guys in germany, it looks like they are developing very nice
capi drivers for the AVM /EICON . http://www.junghanns.net/asterisk/
This last two brands are more expensive that the one I bought .
>>>Simon Tennant <simon@imaginator.com> 11/02 9:11 am
>>>
Sounds like a nice setup - I was planning on doing the same. Which card
did you decide on?
S.
On Sun, Oct 31, 2004 at 09:21:33PM +0000, Paulo Adriano wrote:
>Hi,
>
>I need an advise for a ISDN card for my HomeOffice Asterisk Setup.
>Currently I started with a couple of x100p for two anolog lines coming
>from a ISDN NT. Works but on bridged calls the sound quality is bad
>and distortion, if the call is being routed from the pstn back to pstn
>on the second line.
>
>My setup is very simple. If a call comes from the pstn our internal
>extension ..rings 4 times in my SIP phone and if no answer goes to my
>mobile phone using the pstn.
>
>Now it s time to go shooping for a simple ISDN card an I need an advise
>regarding my simple requirements. Please advise with some options.
>
>Thanks
>Paulo
>
>Francisco Paulo Adriano
>WaveLIS LDA
>Mobile +351 91 870 87 98
>Office + 351 21 989 83 34
>Fax +351 21 989 83 35
>E-mail : pauloadriano@wavelis.pt
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041102/da4dbf24/attachment.htm