Try the two combinations
1) Press the Green Speaker Button Once then 1234 and then press the key
that shows you IP Address. This Will reboot the box.
2) Press *5#5 and a # on the Key pad. This resets the box
If this does not work, download the PALMTOOL from
http://ipphone.eezeephone.com
and use it to reload the older firmware.
Seshu Kanuri
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Isamar
Maia
Sent: Monday, October 25, 2004 11:46 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] ATCOM froze
Hi folks,
While upgrading the firmware of an ATCOM AT-323, the power was cut.
Now, it just shows "Booting..." in the panel and freezes.
Any thoughts?
Isamar
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--------------------------------------------------------
NOTICE: If received in error, please destroy and notify sender. Sender does not
waive confidentiality or privilege, and use is prohibited.