niels@wxn.nl
2004-Oct-25 06:25 UTC
[Asterisk-Users] sip.conf user with defaultip=....worksbutcallerid not settable (= ip)
I just do a -->> asterisk -rx reload This picks up the changes in sip.conf for sure :-) If I comment out the defaultip line then asterisk still uses the IP address as callerid :-( -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 3:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip=....worksbutcallerid not settable (= ip) I trust you are stopping and restarting asterisk between changes? Try commenting out the defaultip line next. ----- Original Message ----- From: <niels@wxn.nl> To: <asterisk-users@lists.digium.com> Sent: Monday, October 25, 2004 9:06 AM Subject: RE: [Asterisk-Users] sip.conf user with defaultip....worksbutcallerid not settable (= ip) No it's the same... it still uses the IP address as callerid I tried the following ones: callerid=<1234567> callerid="1234567" callerid=1234567 ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 2:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip= .... worksbutcallerid not settable (= ip) try is with just "callerid=<1234567>" ----- Original Message ----- From: niels@wxn.nl To: asterisk-users@lists.digium.com Sent: Monday, October 25, 2004 8:33 AM Subject: [Asterisk-Users] sip.conf user with defaultip= .... works butcallerid not settable (= ip) Hello I have this in my sip.conf ... it's a cisco which I authenticate on it's IP adress this works.. asterisk authenticates sip calls from this IP as user 1234567 and uses the right context, only, the CALLERID is the ip adress e.g. 19216801 instead of the callerid which i try to set using the 'callerid=' field if I make a user authenticate with his username and password the callerid part does work does anyone know what I am doing wrong? sip.conf: ;Test 123 [1234567] context=outbound type=friend host=192.168.0.1 insecure=very defaultip=192.168.0.1 username=1234567 callerid="1234567" <1234567> ________________________________ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Steve Totaro
2004-Oct-25 06:34 UTC
[Asterisk-Users] sip.conf user withdefaultip=....worksbutcallerid not settable (= ip)
What type of phone? What setting on phone. Try commenting out the host line. Thanks, Steve Totaro stotaro@totarotechnologies.com www.totarotechnologies.com ----- Original Message ----- From: <niels@wxn.nl> To: <asterisk-users@lists.digium.com> Sent: Monday, October 25, 2004 9:25 AM Subject: RE: [Asterisk-Users] sip.conf user withdefaultip=....worksbutcallerid not settable (= ip) I just do a -->> asterisk -rx reload This picks up the changes in sip.conf for sure :-) If I comment out the defaultip line then asterisk still uses the IP address as callerid :-( -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 3:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip=....worksbutcallerid not settable (= ip) I trust you are stopping and restarting asterisk between changes? Try commenting out the defaultip line next. ----- Original Message ----- From: <niels@wxn.nl> To: <asterisk-users@lists.digium.com> Sent: Monday, October 25, 2004 9:06 AM Subject: RE: [Asterisk-Users] sip.conf user with defaultip....worksbutcallerid not settable (= ip) No it's the same... it still uses the IP address as callerid I tried the following ones: callerid=<1234567> callerid="1234567" callerid=1234567 ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 2:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip= .... worksbutcallerid not settable (= ip) try is with just "callerid=<1234567>" ----- Original Message ----- From: niels@wxn.nl To: asterisk-users@lists.digium.com Sent: Monday, October 25, 2004 8:33 AM Subject: [Asterisk-Users] sip.conf user with defaultip= .... works butcallerid not settable (= ip) Hello I have this in my sip.conf ... it's a cisco which I authenticate on it's IP adress this works.. asterisk authenticates sip calls from this IP as user 1234567 and uses the right context, only, the CALLERID is the ip adress e.g. 19216801 instead of the callerid which i try to set using the 'callerid=' field if I make a user authenticate with his username and password the callerid part does work does anyone know what I am doing wrong? sip.conf: ;Test 123 [1234567] context=outbound type=friend host=192.168.0.1 insecure=very defaultip=192.168.0.1 username=1234567 callerid="1234567" <1234567> ________________________________ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
niels@wxn.nl
2004-Oct-25 06:43 UTC
[Asterisk-Users] sip.conf user with defaultip=....worksbutcallerid not settable (= ip)
PS.. If I send NO callerid at all from my cisco, asterisk translates the callerid to the ip address where the call originates from (in this case my cisco).. When I DO send a callerid from my cisco it uses THAT callerid But still I don't get it to overrule the callerid by setting the callerid= line -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 3:14 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip=....worksbutcallerid not settable (= ip) I trust you are stopping and restarting asterisk between changes? Try commenting out the defaultip line next. ----- Original Message ----- From: <niels@wxn.nl> To: <asterisk-users@lists.digium.com> Sent: Monday, October 25, 2004 9:06 AM Subject: RE: [Asterisk-Users] sip.conf user with defaultip....worksbutcallerid not settable (= ip) No it's the same... it still uses the IP address as callerid I tried the following ones: callerid=<1234567> callerid="1234567" callerid=1234567 ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Totaro Sent: Monday, October 25, 2004 2:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] sip.conf user with defaultip= .... worksbutcallerid not settable (= ip) try is with just "callerid=<1234567>" ----- Original Message ----- From: niels@wxn.nl To: asterisk-users@lists.digium.com Sent: Monday, October 25, 2004 8:33 AM Subject: [Asterisk-Users] sip.conf user with defaultip= .... works butcallerid not settable (= ip) Hello I have this in my sip.conf ... it's a cisco which I authenticate on it's IP adress this works.. asterisk authenticates sip calls from this IP as user 1234567 and uses the right context, only, the CALLERID is the ip adress e.g. 19216801 instead of the callerid which i try to set using the 'callerid=' field if I make a user authenticate with his username and password the callerid part does work does anyone know what I am doing wrong? sip.conf: ;Test 123 [1234567] context=outbound type=friend host=192.168.0.1 insecure=very defaultip=192.168.0.1 username=1234567 callerid="1234567" <1234567> ________________________________ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Steve Totaro
2004-Oct-25 07:25 UTC
[Asterisk-Users] sip.conf user withdefaultip=....worksbutcallerid not settable (= ip)
----- Original Message ----- From: <niels@wxn.nl> To: <asterisk-users@lists.digium.com> Sent: Monday, October 25, 2004 9:43 AM Subject: RE: [Asterisk-Users] sip.conf user withdefaultip=....worksbutcallerid not settable (= ip) PS.. If I send NO callerid at all from my cisco, asterisk translates the callerid to the ip address where the call originates from (in this case my cisco).. When I DO send a callerid from my cisco it uses THAT callerid Problem solved then.