I'm using IAXComm on the Mac to connect to my Asterisk system and it all seems to work well when I'm connected to my wired network. When I use wireless instead, IAXComm never registers with Asterisk and when I call, ASterisk seems to think it's connected but no sound comes back. My Asterisk server contains a wireless card and all my wireless connections use a different subnet to my wired network. Wireless networking seem to work fine and in fact I've been using it for years, so I have no idea why Asterisk is having problems. Does anyone have any ideas why it doesn't work?
Benjamin on Asterisk Mailing Lists
2004-Oct-23 09:03 UTC
[Asterisk-Users] IAX wireless problem
On Sat, 23 Oct 2004 17:10:40 +0200, Neal Nelson <neal@nelsonnet.org> wrote:> I'm using IAXComm on the Mac to connect to my Asterisk system and it > all seems to work well when I'm connected to my wired network. When I > use wireless instead, IAXComm never registers with Asterisk and when I > call, ASterisk seems to think it's connected but no sound comes back.did you define your client as host=dynamic in iax.conf? use "iax2 debug" on the asterisk console to get a session transcript when you try to register and make test calls. if there are no Rx-Frame messages coming in from the client, then you have some sort of connectivity problem with your wireless setup. Use tcpdump or ethereal to see if any traffic is coming in on port 4569. rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed.