Scott Henderson
2004-Oct-20 02:21 UTC
[Asterisk-Users] Meetme room calls quiet for some lines/callers
I just tried out the meetme room feature for the first time and found a few issues with the levels. I had three calls, one on an fxs port (TMD400), 2 on fxo ports, one fxs was a 100P the other was on the TDM400. The phone on the fxs port could hear and everyone could hear that line. The two calls on the fxo could barely hear each other. I did a little fiddling with the rx and tx gain settings in zapata.conf and this impacted the over all levels for all lines but I am not sure I completely understand what is happening here and in what direction the tx and rx are effecting things. Does anyone have some guidance on how I should change these settings or if I should be looking at something else. -- Scott Henderson =========================================Finite Technologies Incorporated 3763 Image Drive, Anchorage, Alaska 99504 Phone: 907.337.2860, Fax: 907.333.4482 http://www.finite-tech.com http://www.chillywall.com http://www.virtuale.cc http://www.mphage.com ==========================================