asterisk users - Oct 2004 - Asterisk not sending full 11 digits dialed....

I'm having trouble getting outbound calls out, immediate release on local 
calls from the partner switch, long distance calls seize the trunk but 
according to the switch eng. at the CO they're only seeing 10 digits, not 
11 (IE theres no 1 ) and the 7 digit dialing doesn't show up at all on 
their end.

Remote switch is a DMS-100, tried in both National and DMS-100 protocol 
modes on *, no luck

* is v1-0-1, and incoming calls work fine.

Any ideas anyone?

--
GPG/PGP --> 0xE736BD7E 5144 6A2D 977A 6651 DFBE 1462 E351 88B9 E736 BD7E

We figured it out.  Well I did.  You pretty much have to use 
pridialplan=unknown in zapata.conf it looks like, with the others libpri 
seems to try to get stupid with the actual digits sent/coded to the remote 
switch.

On Tue, 19 Oct 2004, Michael Loftis wrote:
> We figured it out.  Well I did.  You pretty much have to use 
> pridialplan=unknown in zapata.conf it looks like, with the others libpri 
> seems to try to get stupid with the actual digits sent/coded to the remote 
> switch.  
Also, your telco may interpret the digits you send differently.
"Unknown"
for TON/NPI tells the telco to interpret the digits as if they were dialed 
on a pots line which is usually what humans want.

Peter