Hello All, I purchased yesterday two G729 licenses from Digium to my asterisk box. I used the register utility and i follow the installation procedures as describes the README. I forced my sipuras to use G729a protocol and on my sip.conf too. I get a message that there's no compatible codecs!!! What should i do? - When i use * show codecs , G.729a AUDIO is there! I tried use my X-Pro and i got the same error. I was looking at ITU website for more information if there's a diference between G729 and G729/a/b and compatibility issues between them. Best Regards , -Jefferson Carvalho Teresina-PI-Brazil
I've use Sipuras with * using G729 - with no problems. Double check that G729 is turned on in the sipura and your sip.conf is correct - if anything post excerpts from your sip.conf. On Oct 16, 2004, at 6:27 AM, Jefferson Carvalho wrote:> Hello All, > > I purchased yesterday two G729 licenses from Digium to > my asterisk box. I used the register utility and i follow > the installation procedures as describes the README. > > I forced my sipuras to use G729a protocol and on my sip.conf > too. > > I get a message that there's no compatible codecs!!! > > What should i do? - When i use * show codecs , > G.729a AUDIO is there! > > I tried use my X-Pro and i got the same error. > > I was looking at ITU website for more information if there's > a diference between G729 and G729/a/b and compatibility > issues between them. > > Best Regards , > > -Jefferson Carvalho > Teresina-PI-Brazil > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Use only g729 and not g729a. I tied it and it works greate with Granstream Phone. ----- Original Message ----- From: "Jefferson Carvalho" <jefferson@jeffnetworks.com.br> To: "Digium/ Asterisk-Users" <asterisk-users@lists.digium.com> Sent: Saturday, October 16, 2004 3:27 AM Subject: [Asterisk-Users] G729 and Sipura.> Hello All, > > I purchased yesterday two G729 licenses from Digium to > my asterisk box. I used the register utility and i follow > the installation procedures as describes the README. > > I forced my sipuras to use G729a protocol and on my sip.conf > too. > > I get a message that there's no compatible codecs!!! > > What should i do? - When i use * show codecs , > G.729a AUDIO is there! > > I tried use my X-Pro and i got the same error. > > I was looking at ITU website for more information if there's > a diference between G729 and G729/a/b and compatibility > issues between them. > > Best Regards , > > -Jefferson Carvalho > Teresina-PI-Brazil > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Be sure, not to write "allow=g729a" in your sip.conf ! Correct entry is "allow=g729" Regards Jefferson Carvalho schrieb:> Hello All, > > I purchased yesterday two G729 licenses from Digium to > my asterisk box. I used the register utility and i follow > the installation procedures as describes the README. > > I forced my sipuras to use G729a protocol and on my sip.conf > too. > > I get a message that there's no compatible codecs!!! > > What should i do? - When i use * show codecs , > G.729a AUDIO is there! > > I tried use my X-Pro and i got the same error. > > I was looking at ITU website for more information if there's > a diference between G729 and G729/a/b and compatibility > issues between them. > > Best Regards , > > -Jefferson Carvalho > Teresina-PI-Brazil > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
I am having the same problem, it doesn't work on my SNOM either. Below is my sip.conf .. On both sipura and SNOM I get same results, I can hear voice but not send voice. sip show channels: Peer User/ANR Call ID Seq (Tx/Rx) Format xx.xx.xx.xx 811 3c26723bacd 00101/00002 UNKN Format unknown??!! Ideas? sip.conf -snip- [811] host=dynamic type=friend context=matt-desk videosupport=no username=811 secret=xxxxxxx mailbox=811@default callerid=Matt Schulte <+1314xxxxxxx> reinvite=no canreinvite=no disallow=all allow=g729 ty.> I purchased yesterday two G729 licenses from Digium to > my asterisk box. I used the register utility and i follow > the installation procedures as describes the README. > > I forced my sipuras to use G729a protocol and on my sip.conf too. > > I get a message that there's no compatible codecs!!! > > What should i do? - When i use * show codecs , > G.729a AUDIO is there! > > I tried use my X-Pro and i got the same error. > > I was looking at ITU website for more information if there's a > diference between G729 and G729/a/b and compatibility issues between > them. > > Best Regards , > > -Jefferson Carvalho > Teresina-PI-Brazil
Yes it shows up. turns out my SNOM maybe a piece of sh*t. It almost looks like Asterisk is responding with g723, or am I backwards./ This is part of SIP debug. I called Digium support, they blamed the SIP devices.. ideas ?? --snip Capabilities: us - 0x7fffffff(G723|GSM|ULAW|ALAW|G726|ADPCM|SLINR|LPC10|G729A|SPEEX|ILBC|UNKN|UNKN, peer - audio=0x104(ULAW|G729A)/video=0x0(EMPTY), combined - 0x104(ULAW|G729A) Non-codec capabilities: us - 0x1(G723), peer - 0x0(EMPTY), combined - 0x0(EMPTY) --snip We're at x.x.x.x port 13612 Answering with non-codec capability 0x1(G723) 12 headers, 9 lines --snip Sip read: SIP/2.0 488 Not Acceptable Here To: <sip:myoung@x.x.x.x:5060>;tag=d3cbced374e9fec1i0 From: "+1636xxxxxxx" <sip:+16365610799@x.x.x.x>;tag=as514cca29 Call-ID: 77924dd352842e345abb716a6661e53e@x.x.x.x CSeq: 102 INVITE Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK285309e6 Warning: 304 spa "Media type not available" Server: Sipura/SPA2000-2.0.10(b) Content-Length: 0 -----Original Message----- From: Carlos Chavez [mailto:cursor@telecomabmex.com] Sent: Friday, October 29, 2004 12:32 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] G729 and Sipura. On Fri, 2004-10-29 at 12:17, Matt Schulte wrote:> I am having the same problem, it doesn't work on my SNOM either. Below > is my sip.conf .. On both sipura and SNOM I get same results, I can > hear voice but not send voice.When you do a "show g729" on the CLI do you get that the license is intalled? You should see something like this: server*CLI> show g729 0/0 encoders/decoders of 7 licensed channels are currently in use If you do not have that command then the g729 module is not properly installed. -- Carlos Ch?vez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
This is still broken, I updated to the latest CVS. Flashed the Sipura and still no dice, does anyone out there have any ideas? Thanks. -----Original Message----- From: Matt Schulte Sent: Friday, October 29, 2004 12:42 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] G729 and Sipura. Yes it shows up. turns out my SNOM maybe a piece of sh*t. It almost looks like Asterisk is responding with g723, or am I backwards./ This is part of SIP debug. I called Digium support, they blamed the SIP devices.. ideas ?? --snip Capabilities: us - 0x7fffffff(G723|GSM|ULAW|ALAW|G726|ADPCM|SLINR|LPC10|G729A|SPEEX|ILBC|UNKN|UNKN, peer - audio=0x104(ULAW|G729A)/video=0x0(EMPTY), combined - 0x104(ULAW|G729A) Non-codec capabilities: us - 0x1(G723), peer - 0x0(EMPTY), combined - 0x0(EMPTY) --snip We're at x.x.x.x port 13612 Answering with non-codec capability 0x1(G723) 12 headers, 9 lines --snip Sip read: SIP/2.0 488 Not Acceptable Here To: <sip:myoung@x.x.x.x:5060>;tag=d3cbced374e9fec1i0 From: "+1636xxxxxxx" <sip:+16365610799@x.x.x.x>;tag=as514cca29 Call-ID: 77924dd352842e345abb716a6661e53e@x.x.x.x CSeq: 102 INVITE Via: SIP/2.0/UDP x.x.x.x:5060;branch=z9hG4bK285309e6 Warning: 304 spa "Media type not available" Server: Sipura/SPA2000-2.0.10(b) Content-Length: 0 -----Original Message----- From: Carlos Chavez [mailto:cursor@telecomabmex.com] Sent: Friday, October 29, 2004 12:32 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] G729 and Sipura. On Fri, 2004-10-29 at 12:17, Matt Schulte wrote:> I am having the same problem, it doesn't work on my SNOM either. Below > is my sip.conf .. On both sipura and SNOM I get same results, I can > hear voice but not send voice.When you do a "show g729" on the CLI do you get that the license is intalled? You should see something like this: server*CLI> show g729 0/0 encoders/decoders of 7 licensed channels are currently in use If you do not have that command then the g729 module is not properly installed. -- Carlos Ch?vez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users