asterisk users - Oct 2004 - Looking for recommendations for a low-cost FXO to IP gateway.

At first I thought the X100P was what I was looking for, but now it 
looks to me like the X100P does not have an IP interface, so it would 
require all audio to run through the CPU.  I'm familiar with ATA186's, 
which I think are comparable to the IAXy box, and I'd just like to find 
something like that that provides an FXO interface.  Can anyone help me?

Thanks
Mark

On Thu, 14 Oct 2004 18:41:16 -0700, Mark <markfun@cox.net>
wrote:
> At first I thought the X100P was what I was looking for, but now it
> looks to me like the X100P does not have an IP interface, so it would
> require all audio to run through the CPU.  I'm familiar with
ATA186's,
> which I think are comparable to the IAXy box, and I'd just like to find
> something like that that provides an FXO interface.
Sipura's SPA-3000 has an FXO port that can be accessed using SIP.

rgds
benjk

-- 
Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya,
Tokyo, Japan.

NB: Spam filters in place. Messages unrelated to the * mailing lists
may get trashed.

> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Mark
> Sent: 15 October 2004 02:41
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] Looking for recommendations for a low-cost FXO
> toIP gateway.
>
>
> At first I thought the X100P was what I was looking for, but now it
> looks to me like the X100P does not have an IP interface, so it would
> require all audio to run through the CPU.  I'm familiar with
ATA186's,
> which I think are comparable to the IAXy box, and I'd just like to find
> something like that that provides an FXO interface.  Can anyone help me?
As far as I know there are quite few companies out there that do FXO
Gateways. Mediatrix does a 2-port and 4-port anologue FXO model. The other
solutions is a Sipura-3000. The Sipura 3000 will need it's own dialplan too,
because it has an FXO, FXS and Eth port. So, you will have to do some
configuration. Some people have reported different issues with it. one of
them is over-heating. I haven't used any of the Mediatrix products, or any
other FXO gateway, so I don't have personal experience.

I hope it helps,
Yiannis.