Hi all.. Both voip-info.org, Digium's own site, and asterisk.org are a bit light on the details on support of Dialogic's single E1 span. Is the single E1 span supported, what channel does it get configured as, and does anyone have a guide or some experience in getting it function in *? Mailing list searches suggest I need to purchase a channel driver from Digium, but no obvious link to such a driver seems to be on the website.. Hopefully it doesn't require binary-only kernel code, it could be a bit painfull.. :| Thanks :) -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration +64-4-8032233 +64-21-402260 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041014/c7278555/attachment.pgp
David Zanetti wrote:> Hi all.. > > Both voip-info.org, Digium's own site, and asterisk.org are a bit light > on the details on support of Dialogic's single E1 span. > > Is the single E1 span supported, what channel does it get configured as, > and does anyone have a guide or some experience in getting it function > in *? > > Mailing list searches suggest I need to purchase a channel driver from > Digium, but no obvious link to such a driver seems to be on the > website.. Hopefully it doesn't require binary-only kernel code, it could > be a bit painfull.. :|Contact Digium. Almost nobody uses these cards with Asterisk. -------------- next part -------------- A non-text attachment was scrubbed... Name: eric.vcf Type: text/x-vcard Size: 146 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041014/0decbb2c/eric.vcf
On Fri, 2004-10-15 at 10:47 +1300, David Zanetti wrote:> Hi all.. > > Both voip-info.org, Digium's own site, and asterisk.org are a bit light > on the details on support of Dialogic's single E1 span. > > Is the single E1 span supported, what channel does it get configured as, > and does anyone have a guide or some experience in getting it function > in *? > > Mailing list searches suggest I need to purchase a channel driver from > Digium, but no obvious link to such a driver seems to be on the > website.. Hopefully it doesn't require binary-only kernel code, it could > be a bit painfull.. :|I think you will be in a binary only kernel module just to use the dialogic card under linux. You have to contact Digium by phone to see about purchaseing the channel driver. I don't think it is binary only, but wouldn't surprise me. You would do well to ebay the card if you don't otherwise need it and then buy a Digium card. -- Steven Critchfield <critch@basesys.com>
Do the dialogic drivers from digium require those lame redhat 7.2/7.3 only drivers that intel released? Donny -----Original Message----- From: Brian West [mailto:brian@bkw.org] Sent: October 14, 2004 8:19 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Dialogic D/300JCT-E1 support> You would do well to ebay the card if you don't otherwise need it and > then buy a Digium card.And you have to sign an NDA to get the drivers for a Dialogic card from Digium. bkw _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users