CHAUVELIN Samuel
2004-Oct-13 06:42 UTC
[Asterisk-Users] CreateLogicalChannel Unknow Data Type
When i run asterisk with a H323 communication : 0:40.519 H225 Answer:9734528 H323 CreateLogicalChannel - forward channel 0:40.520 H225 Answer:9734528 H323 Found capability: G.711-ALaw-64k{hw} <1> 0:40.521 H225 Answer:9734528 RTP Found existing session 1 0:40.522 H225 Answer:9734528 H323RTP Receiver created using session 1 0:40.523 H225 Answer:9734528 LID Created codec: pt=PCMA, bytes=240, samples=8 0:40.971 H225 Answer:9734528 LogChan Bandwidth requested/used = 64.0/0.0 kb/s 0:41.186 H225 Answer:9734528 H323 Bandwidth request: -0.0kb/s, available: 192.0kb/s 0:41.417 H225 Answer:9734528 H323 Bandwidth request: +64.0kb/s, available: 192.0kb/s 0:41.801 H225 Answer:9734528 H323RTP OnReceivedPDU for channel: R-101 0:41.860 H225 Answer:9734528 RTP_UDP SetRemoteSocketInfo: session=1 control channel, new=192.168.0.32:5005, local=192.168.0.33:10000-10001, remote=192.168.0.32:5004-5005 0:42.309 H225 Answer:9734528 H323 CreateLogicalChannel - reverse channel 0:42.537 H225 Answer:9734528 H323 CreateLogicalChannel - unknown data type 0:42.937 H225 Answer:9734528 H323 CreateLogicalChannel - forward channel 0:42.988 H225 Answer:9734528 H323 CreateLogicalChannel - unknown data type 0:43.212 H225 Answer:9734528 H323 CreateLogicalChannel - reverse channel I try codec in the same order withe the same number of frame but it doesn't work. Why this pb my Channel ?