Can you post your config's please? At least the parts that pertain to your
question. It may help to figure out if there is a problem.
_____
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mason Herring
Sent: Saturday, October 09, 2004 8:35 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Access Bank II
I have a CAC Access Bank II with 2 T1 and 48 analog ports and am using an
Asterisk server with 2 T100P cards. Both Access Bank and T100 cards have
green lights. Zaptel.conf and Zapata.conf are configured for fxo loop start
and I show 48 configured channels when doing ztcfg. When we take an analog
line from one of the 48 ports off-hook I show an active channel in zttool
but get no dial tone. Is there anyone with a similar setup that can help?
Thanks,
Mason Herring
Delta Signal LLC
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041009/617874b1/attachment.htm