asterisk users - Sep 2004 - wcfxo load problem

Hi all, i have an Asterisk server with the following hardware configuration:
- 2 ethernet cards (e100, 8139too)
- 1 TDM22B : 2 Ports FXS & 2 Ports FXO
- 1 TDM04B: 4 Ports FXO bundle
 
When i load the FXS module (modprobe wcfxs) its just fine, but when i load the
FXO module (modprobe wcfxo) appears the following error:
 
"/lib/modules/2.4.20-31.9/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod
/lib/modules/2.4.20-31.9/misc/wcfxo.o failed
/lib/modules/2.4.20-31.9/misc/wcfxo.o: insmod wcfxo failed"
 
Maybe its a hardware conflict with the IRQ, i dont know if there is a way to
change the IRQ parameters and if so how can i do it?
 
Thanks for your help.
 
Carlos Andres Medina


		
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/e737037d/attachment.htm

On Mon, 2004-09-20 at 14:17, Carlos Medina wrote:
> When i load the FXS module (modprobe wcfxs) its just fine, but when i
> load the FXO module (modprobe wcfxo) appears the following error:
You need to read the README in the zaptel source directory.  That will
tell you which module to load for which card.

-- 
          Eric Wieling * BTEL Consulting * 504-899-1387 x2111
"In a related story, the IRS has recently ruled that the cost of Windows
upgrades can NOT be deducted as a gambling loss."