I am running Asterisk CVS-HEAD-08/25/04-20:11:31. I have two IAX accounts that I use, FWD and VoicePulse. FWD requires you use ULAW codec to connect. VoicePulse will work with most all the codecs Asterisk supports. I recently tried to force VoicePulse connections to use ILBC or GSM and found it would not work so long as ULAW was enabled anywhere in the iax.conf file. Below is my iax.conf file and although I have explicitly disallowed ULAW in the VoicePulse section, it is still used when I make a VP call. Only when I disallow all ULAW usage will I connect to VP with ILBC or GSM... but when I do this FWD will not work as it requires ULAW. Is this a bug or am I not setting the parameters correctly. Any help is appreciated. ; iax.conf [general] port=5036 bindaddr=0.0.0.0 ; Specify bandwidth of low, medium, or high to control which codecs are used ; in general. ; bandwidth=low ; You can also fine tune codecs here using "allow" and "disallow" clauses ; with specific codecs. Use "all" to represent all formats. ; disallow=all allow=gsm allow=ilbc allow=ulaw jitterbuffer=no ; FWD IAX2 Account register => aaaaaa:pppppp@iax2.fwdnet.net ; VoicePulse Account register => aaaaaaaa:ppppppp@gwiax-in-01.voicepulse.com [iaxfwd] type=user context=from-iaxfwd deny=0.0.0.0/0.0.0.0 permit=65.39.205.0/255.255.255.0 disallow=gsm disallow=ilbc allow=ulaw [voicepulse-in-01] type=user context=from-voicepulse auth=rsa inkeys=voicepulse01 disallow=ulaw allow=gsm allow=ilbc -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/30856dce/attachment.htm