This may be a ridiculous question, but here is my problem I have 4 X100P's.
Three of them need to be outbound only, no answering at all. Additionally I
need
one X100P to be in bound/outbound. I have used the default Extension
configuration.
I put in/outbound in the context.
Zapa.conf
[default]
group=1
channel= 1
[local]
Group=1,2
Channel=2-4
I thought this made sense, but every channel answers if it rings. I can get
them never to answer, if
I put them in some non-defined context, but the minute one of them is in a
valid context, they
Answer. I thought it was the pickup groups, or call groups so I removed
them. Any insight would be
Much appreciated. I must not have a grasp of the contexts. I found a context
in sip.conf and got very
Confused.
Ravi Hanumaiah
Senior Network Engineer III
Lan/WAN/Specialist
ravi@network-services.planetdns.net
<mailto:ravi@network-services.planetdns.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040816/25dc6731/attachment.htm
