Are you going to use single E1 line? How many concurrent calls.
Single Xeon 3.0 with *1 GB *ram should serve 30-32 calls with not
problem, even during G729 transcoding and echo cancellation.
If you are not plaining to do G729 transcoding - then I believe you can
put more then 32 calls in this box.
>Having kept an Eye on hardware specs mails in the list, and having read the
>hardware notes on voip-info, I am still confused over the recommended
>hardware:
>
>We are going to have up to 100 operators and staff making calls, mostly
>through zap connected to TE405P through to a 32-channel E1. However, it is
>possible that we may need another E1 - what is the rough ratio between
>operators and calls when the call length on average is 3 minutes?)
>
>I was thinking of adding some VOIP into the mix. So, what speed proc should
>I use ? I am currently looking at:
>
>A) Dual-Xeon 2.8 with 2 GB ram and 36 gb raid-1
>B) Single Xeon 3.0 with 2 GB ram and 36 gb raid-1
>
>So, assuming I stick with 1 E1 line, is a dual better than a single, or
>should I take the savings from buying a single Xeon, and buy two machines
>with two TE405p cards ?
>
>Help!
>
>Thanks.
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>