Today is the first time I've had any show stopping errors with asterisk
since I started using it over 8 months ago... While I wait on the telco to
check the circuit I thought I would post this here. Not sure yet but I
thinks my 4-port PRI card is gone!!!
I made a call and right when the person answered - BOOM. This is only a
little better than it not working at all.
============================================================================
-- Executing Dial("SIP/2003-ba0e", "Zap/g1/2245707") in new
stack
-- Called g1/2245707
-- Zap/2-1 is ringing
-- Zap/2-1 answered SIP/2003-ba0e
Aug 5 14:50:18 WARNING[14351]: chan_zap.c:6058 zt_pri_error: PRI: Read on
117 failed: Unknown error 500
Aug 5 14:50:18 NOTICE[14351]: chan_zap.c:6769 pri_dchannel: PRI got
event: 6 on span 1
Aug 5 14:50:18 WARNING[24599]: chan_zap.c:6058 zt_pri_error: PRI: Short
write: -1/15 (Unknown error 500)
Aug 5 14:50:18 WARNING[24599]: chan_zap.c:2901 zt_handle_event: Detected
alarm on channel 2: Red Alarm
-- Hungup 'Zap/2-1'
== Spawn extension (longdistance, 92245707, 1) exited non-zero on
'SIP/2003-ba0e'
Aug 5 14:50:18 WARNING[14351]: chan_zap.c:6058 zt_pri_error: PRI: Read on
117 failed: Unknown error 500
Aug 5 14:50:18 NOTICE[14351]: chan_zap.c:6769 pri_dchannel: PRI got
event: 4 on span 1
Aug 5 14:50:18 WARNING[18451]: chan_zap.c:4971 handle_init_event:
Detected alarm on channel 1: Red Alarm
<CUT_ALARMS_2_THRU_23>
Aug 5 14:50:24 NOTICE[18451]: chan_zap.c:4966 handle_init_event: Alarm
cleared on channel 1
<CUT_NOTICE_2_23>
Aug 5 14:50:24 WARNING[14351]: chan_zap.c:6058 zt_pri_error: PRI: Read on
117 failed: Unknown error 500
Aug 5 14:50:24 NOTICE[14351]: chan_zap.c:6769 pri_dchannel: PRI got
event: 5 on span 1
lselinux*CLI>
============================================================================
Anybody have any ideaz?
--
Andrew McRory - President
Linux Systems Engineers, Inc.
PO BOX 3791
Tallahassee, FL 32315
Office 850-224-5737
Office 850-575-7213
Mobile 850-294-7567
