asterisk users - Jul 2004 - Help needed for Seting Up Asterisk

Hello List,
I'm from Germany and I want to use a Asterisk System.
I have a few Accounts at my SIP-Provider www.sipgate.de and now I want to use my
ISDN-Phone on the Sip-System.
My idea was i set up a Asterisk-System and i will put in an ISDN Card where I
can plug a ISDN Phone, I will have to use an ISDN card with the NT-Mode.
The Asterisk has to register is at the SIP Provider and if a Call comes to me
the Asterisk has to gibe the call to the ISDN card where the Telephone will
ring.
If the SIP Account 1 rings the telephone should get the MSN 1 and if Account 2
rings, the telephone should get the MSN 2.
I will use Asterisk behind a NAT Router. If the Internetconnection interrupts
the Asterisk has to wait 20 seconds, then has to register at the SIP-Provider.
How can I do this, can somebody please help me?
How is it possible to get the SIP Calls to the ISDN card?
Would be very nice if you could help me.

Thanks

Moritz Beierlein
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040721/cf082b52/attachment.htm

Hello-
 
First, it sounds like asterisk can do what you want to do.  You have a
number of requirements, though. I think its too much to expect people on
here to design your application for you for free.  Perhaps you might hire a
consultant for a few hours to help you out (see the asterisk Wiki for
general information, and for a list of consultants):
 
http://www.voip-info.org/tiki-index.php?page=Asterisk
 
regards
Scott Stingel
 
Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com <http://www.evtmedia.com/>  
 

________________________________

From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Beierlein Moritz
Sent: Wednesday, July 21, 2004 12:05 PM
To: Asterisk-Users@lists.digium.com
Subject: [Asterisk-Users] Help needed for Seting Up Asterisk


Hello List,
I'm from Germany and I want to use a Asterisk System.
I have a few Accounts at my SIP-Provider www.sipgate.de and now I want to
use my ISDN-Phone on the Sip-System.
My idea was i set up a Asterisk-System and i will put in an ISDN Card where
I can plug a ISDN Phone, I will have to use an ISDN card with the NT-Mode.
The Asterisk has to register is at the SIP Provider and if a Call comes to
me the Asterisk has to gibe the call to the ISDN card where the Telephone
will ring.
If the SIP Account 1 rings the telephone should get the MSN 1 and if Account
2 rings, the telephone should get the MSN 2.
I will use Asterisk behind a NAT Router. If the Internetconnection
interrupts the Asterisk has to wait 20 seconds, then has to register at the
SIP-Provider.
How can I do this, can somebody please help me?
How is it possible to get the SIP Calls to the ISDN card?
Would be very nice if you could help me.
 
Thanks
 
Moritz Beierlein

On Wed, Jul 21, 2004 at 09:04:58PM +0200, Beierlein Moritz
wrote:
> My idea was i set up a Asterisk-System and i will put in an ISDN Card
> where I can plug a ISDN Phone, I will have to use an ISDN card with the
NT-Mode.
HFC (Cologne Chip) cards can be used.


> I will use Asterisk behind a NAT Router.
Did you read this:
http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions


And:

"The localnet/externip settings of sip.conf permit Asterisk to
operate behind certain types of NATs. However, it requies that the
external IP be known and set manually in the Asterisk configuration.
More importantly, the localnet/externip settings do not solve the
problem of Asterisk. behind a port translating (Full Cone) NAT."
(copied from http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions )

> If the Internetconnection interrupts the Asterisk has to wait 20 seconds,
> then has to register at the SIP-Provider.
Asterisk does not detect this, but you can choose a small value for
registration expiry.

> How is it possible to get the SIP Calls to the ISDN card?
http://www.voip-info.org/wiki-Asterisk+config+extensions.conf


-- 
Stefan Tichy   <asterisk@pi4tel.de>

Ich habe eine einfachere Konfiguration IAX ?ber Asterisk mit einem Sipura
SPA-2000-Ger?t, dass sich mit der Asterisk registriert, aber  ich habe bisher
keinen Erfolg gehabt, dadurch eine Sipgate-Verbindungen aufzustellen.
 
Hast Du es mal mit IAX versucht?
 
Gruss,
Roger (aus Michigan)
________________________________

From:	 Beierlein Moritz [mailto:Beierlein.Moritz@t-online.de]	
Sent:	 Wed 7/21/2004 15:04	
To:	 Asterisk-Users@lists.digium.com	
Subject:	 [Asterisk-Users] Help needed for Seting Up Asterisk	
 	
Hello List,
I'm from Germany and I want to use a Asterisk System.
I have a few Accounts at my SIP-Provider www.sipgate.de and now I want to use my
ISDN-Phone on the Sip-System.
My idea was i set up a Asterisk-System and i will put in an ISDN Card where I
can plug a ISDN Phone, I will have to use an ISDN card with the NT-Mode.
The Asterisk has to register is at the SIP Provider and if a Call comes to me
the Asterisk has to gibe the call to the ISDN card where the Telephone will
ring.
If the SIP Account 1 rings the telephone should get the MSN 1 and if Account 2
rings, the telephone should get the MSN 2.
I will use Asterisk behind a NAT Router. If the Internetconnection interrupts
the Asterisk has to wait 20 seconds, then has to register at the SIP-Provider.
How can I do this, can somebody please help me?
How is it possible to get the SIP Calls to the ISDN card?
Would be very nice if you could help me.
 
Thanks
 
Moritz Beierlein
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5492 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20040721/c2693485/attachment.bin