Alessio Focardi
2004-Jun-14 01:55 UTC
[Asterisk-Users] Accepting post selection digits over isdn trunking
Hi friends,
I succesfully integrated asterisk with a pbx using an HFC isdn card in
NT mode.
In the pbx I have defined the ISDN interface asterisk is connected as
a trunk line, so when I dial 0 all subsequent digits are sent to
asterisk.
How can I instruct asterisk to wait for a timeout for incoming
extention ?
Now if I set
exten => 20,1,Goto(demo,s,5)
as the only extention it will wait for 2 digits
if I set
exten => 200,1,Goto(demo,s,5)
it will wait for 3
Lets say that I want to have asterik wait for a timeout, instead of
number of maximum digits I have in the dialplan ... is it possibile ?
It will come handy when I will have to set up an extension for dialing
out over some other telco line connected to asterisk, since dialed numbers
will not be of fixed lenght ...
Lets say for instance:
exten => _9X.,1,Dial(zap/g1,${exten:1})
From a phone connected to pbx I will have to do 0 (go to asterisk) then 9 (we
are
dialing outside), then the number, but the dial will occour after the
first digit.
Tnx for any help !
--
Best regards,
Alessio mailto:afoc@interconnessioni.it