Is there any way to debug the TE410P and see if it
sees the loop start signals?
Using the fxs_ls settings, the TE410P does not see
when the remote side drops the call.
Is e&m signaling a more reliable way to go?
On Mon, 2004-05-24 at 11:41, Joseph wrote:> Using a Wildcard TE410P, I have span2 setup.
>
> Consistently an incoming call that is dropped by the remote
> party, * can not detect the dropped call and holds it till
> finally it times out and drops it that way.
>
> Here is the config for it:
>
> span=2,1,0,d4,ami
> fxsks=25-48
>
> group=3
> callerid="TEst" <555-12125>
> signalling=fxs_ks
> context=incoming_t1
> channel=25-48
> usecallerid=no
> busydetect=yes
> busycount=10
> callprogress=no
--
respectfully, Joseph - (606) 477-2355 x140
------=============