The answer is in the error.... use FXS signalling. replace fxo_ks with fxs_ks. Sean -----Original Message----- From: vozip [mailto:vozip@startwave.com] Sent: Tuesday, March 30, 2004 2:31 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] problem with configuration. Importance: High Hi, When i run the asterisk with my FXO x100p and configure: vi /etc/zaptel.conf fxoks=1 loadzone=us defaultzone=us # vi /etc/asterisk/zapata.conf [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 pickupgroup=1-4 immediate=no context=bell callerid=asreceived channel=1 context=home group=1 signalling=fxo_ks mailbox=2468 callerid="Phone 1" <2468> channel=1 AND RUN ZTCFG. root@ariadna:/etc/asterisk# ztcfg -vv Zaptel Configuration ===================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? ANY IDEAS.! CHEERS.! VOZIP _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: lists.digium.com/mailman/listinfo/asterisk-users