Daniel Cubero Salas, Ing
2004-Mar-26 02:32 UTC
[Asterisk-Users] Re: 0.7.2 with cisco router & 7960
yes, the 7960 is sending the right digits, because in message log from asterisk I can see each dtmf. A brief message log is below: Mar 25 19:28:33 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:33 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:33 DEBUG[1209214528]: Difference is 976, ms is 142 Mar 25 19:28:33 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:33 DEBUG[1200826048]: Difference is 3192, ms is 419 Mar 25 19:28:33 DEBUG[1200826048]: Difference is 4280, ms is 555 Mar 25 19:28:38 DEBUG[1200826048]: Sending dtmf: 57 (9) Mar 25 19:28:38 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:38 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:38 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:39 DEBUG[1200826048]: Difference is 3336, ms is 437 Mar 25 19:28:39 DEBUG[1200826048]: Difference is 4296, ms is 557 Mar 25 19:28:39 DEBUG[1200826048]: Sending dtmf: 50 (2) Mar 25 19:28:39 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:39 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:39 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:40 DEBUG[1200826048]: Difference is 3336, ms is 437 Mar 25 19:28:40 DEBUG[1200826048]: Difference is 4296, ms is 557 Mar 25 19:28:40 DEBUG[1200826048]: Sending dtmf: 50 (2) Mar 25 19:28:40 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:40 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:40 DEBUG[1209214528]: Difference is 2104, ms is 283 Mar 25 19:28:40 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:40 DEBUG[1200826048]: Difference is 2072, ms is 279 Mar 25 19:28:40 DEBUG[1200826048]: Difference is 4288, ms is 556 Mar 25 19:28:41 DEBUG[1200826048]: Sending dtmf: 56 (8) Mar 25 19:28:41 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:41 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:41 DEBUG[1209214528]: Difference is 824, ms is 123 Mar 25 19:28:41 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:41 DEBUG[1200826048]: Difference is 3336, ms is 437 Mar 25 19:28:41 DEBUG[1200826048]: Difference is 4296, ms is 557 Mar 25 19:28:42 DEBUG[1200826048]: Sending dtmf: 51 (3) Mar 25 19:28:42 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) Mar 25 19:28:42 DEBUG[1200826048]: Bridge stops bridging channels SIP/2010-9164 and SIP/cisco2600-2b14 Mar 25 19:28:42 DEBUG[1209214528]: Difference is 1144, ms is 163 Mar 25 19:28:42 DEBUG[1209214528]: Auto-deactivating generator Mar 25 19:28:42 DEBUG[1200826048]: Difference is 3032, ms is 399 Mar 25 19:28:42 DEBUG[1200826048]: Difference is 4296, ms is 557 Mar 25 19:28:43 DEBUG[1200826048]: Sending dtmf: 55 (7) Mar 25 19:28:43 DEBUG[1200826048]: Got AST_BRIDGE_DTMF_CHANNEL_0 on c0 (SIP/2010-9164) I tought than the wrong interpretation or transport is on Cisco 2600 when the call is outgoing and use DTMF (the voice is sending without trouble) Daniel Kurt Pasewaldt writes:> Daniel, > > Can you determine if the 7960 is sending the right > amount of digits. > > CME = Cisco Call Manager Express (PBX) > Its a scaled down version of Call Manage and it can be > ran on the following routers: > > 1751-v > 1760 1760-v > 2610XM > 2611XM > 2620XM > 2650XM > 2651XM-V > 2691 > 3640 3640-A > 3660 > 3725/45 > IAD2420 > > --- "Daniel Cubero Salas, Ing" <dcubero@cosinet.net> > wrote: >> Our cisco router have these dial peers: >> >> dial-peer voice 900 pots >> application session >> destination-pattern 5000 >> port 1/0/0 >> ! >> dial-peer voice 800 pots >> application session >> destination-pattern 9 >> port 1/1/1 >> ! >> dial-peer voice 701 pots >> application session >> destination-pattern 3003 >> port 1/0/1 >> ! >> dial-peer voice 10 pots >> application session >> destination-pattern 13T >> port 0/0:1 <------ Channelized E1 >> ! >> dial-peer voice 5 pots >> incoming called-number XXXXX00 >> direct-inward-dial >> ! >> dial-peer voice 35 pots >> application session >> destination-pattern 12T >> port 1/1/1 >> ! >> dial-peer voice 36 pots >> application session >> destination-pattern 14T >> port 1/1/0 >> ! >> dial-peer voice 1 voip >> application session >> destination-pattern ....... >> session protocol sipv2 >> session target sip-server >> dtmf-relay rtp-nte >> codec g711ulaw >> no vad >> ! >> dial-peer voice 4 pots >> incoming called-number XXXXX10 >> direct-inward-dial >> ! >> dial-peer voice 6 pots >> incoming called-number XXXXX11 >> direct-inward-dial >> ! >> dial-peer voice 7 pots >> incoming called-number XXXXX12 >> direct-inward-dial >> ! >> >> ====>> When the call is from PSTN, detection of DTMF by >> Asterisk+Cisco 2600 works >> pretty well; but when the call is from Cisco 7960 >> phone thru ASTERISK+Cisco >> 2600 to PSTN (like IVR o PBX) always DTMF tones (for >> long number example 4 >> or more) aren?t recognized or it has wrong detection >> (I digit 9228373 but >> PBX in PSTN seen 928373 or 9287 or 922283). >> >> am I missing anything? >> >> Regards >> >> Daniel >> >> Pd. What is meaning of CME? >> >> >> >> >> Kurt Pasewaldt writes: >> >> > >> > What does your VoIP dial peer look like? >> > Does it have dtmf-relay rtp-nte under the VoIP >> > dial peer. This will enable RC2833. This assume >> you >> > are not running the CME load on the router. >> > >> > Kurt >> > >> > __________________________________ >> > Do you Yahoo!? >> > Yahoo! Finance Tax Center - File online. File on >> time. >> > http://taxes.yahoo.com/filing.html >> > > > __________________________________ > Do you Yahoo!? > Yahoo! Finance Tax Center - File online. File on time. > http://taxes.yahoo.com/filing.html