Daniel Cubero Salas, Ing
2004-Mar-26 01:32 UTC
[Asterisk-Users] Re: 0.7.2 with cisco router & 7960
Our cisco router have these dial peers: dial-peer voice 900 pots application session destination-pattern 5000 port 1/0/0 ! dial-peer voice 800 pots application session destination-pattern 9 port 1/1/1 ! dial-peer voice 701 pots application session destination-pattern 3003 port 1/0/1 ! dial-peer voice 10 pots application session destination-pattern 13T port 0/0:1 <------ Channelized E1 ! dial-peer voice 5 pots incoming called-number XXXXX00 direct-inward-dial ! dial-peer voice 35 pots application session destination-pattern 12T port 1/1/1 ! dial-peer voice 36 pots application session destination-pattern 14T port 1/1/0 ! dial-peer voice 1 voip application session destination-pattern ....... session protocol sipv2 session target sip-server dtmf-relay rtp-nte codec g711ulaw no vad ! dial-peer voice 4 pots incoming called-number XXXXX10 direct-inward-dial ! dial-peer voice 6 pots incoming called-number XXXXX11 direct-inward-dial ! dial-peer voice 7 pots incoming called-number XXXXX12 direct-inward-dial ! ====When the call is from PSTN, detection of DTMF by Asterisk+Cisco 2600 works pretty well; but when the call is from Cisco 7960 phone thru ASTERISK+Cisco 2600 to PSTN (like IVR o PBX) always DTMF tones (for long number example 4 or more) aren?t recognized or it has wrong detection (I digit 9228373 but PBX in PSTN seen 928373 or 9287 or 922283). am I missing anything? Regards Daniel Pd. What is meaning of CME? Kurt Pasewaldt writes:> > What does your VoIP dial peer look like? > Does it have dtmf-relay rtp-nte under the VoIP > dial peer. This will enable RC2833. This assume you > are not running the CME load on the router. > > Kurt > > __________________________________ > Do you Yahoo!? > Yahoo! Finance Tax Center - File online. File on time. > http://taxes.yahoo.com/filing.html