Jeb Campbell
2004-Mar-20 17:36 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)
Hello all, I'm having a problem with a T1 connection to a Avaya PBX (asterisk is an IVR). I could not get pri working and now I'm simply trying to get asterisk working with fxs_ks. Questions: 1. Is there anyway to troubleshoot or see what is being sent on the T1. zttool shows no errors, and the Avaya rings the t1 if wct1xxp is loaded, and gives busy if it is not loaded -- so I think something is being sent down the line, I just don't know what it is (asterisk -vvvvvc shows nothing) 2. Is there anyone with Avaya PBX -> asterisk experience on the list? I'm remote, but I can login -- I just don't know what commands can troubleshoot the connection. Config: zaptel.conf (relevant section) span=1,1,0,esf,b8zs fxsks=1-24 zapata.conf [channels] context = demo switchtype = national signalling = fxs_ks group = 1 channel => 1-24 Thanks for any time and help Jeb Campbell jebc@c4solutions.net Cell: 865-385-1437
James Coberly
2004-Mar-20 18:30 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)
Check out : http://www.voip-info.org/wiki-Asterisk+Avaya Depending upon the card you are using in the Avaya, you should set it up as a tie trunk on the Avaya side. James- ----- Original Message ----- From: "Jeb Campbell" <jebc@c4solutions.net> To: <asterisk-users@lists.digium.com> Sent: Saturday, March 20, 2004 7:36 PM Subject: [Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)> Hello all, > I'm having a problem with a T1 connection to a Avaya PBX (asterisk is > an IVR). > I could not get pri working and now I'm simply trying to get asterisk > working with fxs_ks. > > Questions: > 1. Is there anyway to troubleshoot or see what is being sent on the T1. > zttool shows no errors, and the Avaya rings the t1 if wct1xxp is > loaded, and gives > busy if it is not loaded -- so I think something is being sent down > the line, I just > don't know what it is (asterisk -vvvvvc shows nothing) > > 2. Is there anyone with Avaya PBX -> asterisk experience on the list? > I'm remote, but I can > login -- I just don't know what commands can troubleshoot the > connection. > > Config: > zaptel.conf (relevant section) > span=1,1,0,esf,b8zs > fxsks=1-24 > > zapata.conf > [channels] > context = demo > switchtype = national > signalling = fxs_ks > group = 1 > channel => 1-24 > > Thanks for any time and help > > Jeb Campbell > jebc@c4solutions.net > Cell: 865-385-1437 > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
marc.sutter@bluewin.ch
2004-Mar-21 04:00 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)
Hi Jeb, Have a look on: ----> http://www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya I think it's what you need. Marc>-- Message original -- >To: asterisk-users@lists.digium.com >From: Jeb Campbell <jebc@c4solutions.net> >Subject: [Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR) >Reply-To: asterisk-users@lists.digium.com >Date: Sat, 20 Mar 2004 19:36:26 -0500 > > >Hello all, > I'm having a problem with a T1 connection to a Avaya PBX (asterisk is >an IVR). >I could not get pri working and now I'm simply trying to get asterisk >working with fxs_ks. > >Questions: >1. Is there anyway to troubleshoot or see what is being sent on the T1. > zttool shows no errors, and the Avaya rings the t1 if wct1xxp is >loaded, and gives > busy if it is not loaded -- so I think something is being sent down >the line, I just > don't know what it is (asterisk -vvvvvc shows nothing) > >2. Is there anyone with Avaya PBX -> asterisk experience on the list? >I'm remote, but I can > login -- I just don't know what commands can troubleshoot the >connection. > >Config: >zaptel.conf (relevant section) >span=1,1,0,esf,b8zs >fxsks=1-24 > >zapata.conf >[channels] >context = demo >switchtype = national >signalling = fxs_ks >group = 1 >channel => 1-24 > >Thanks for any time and help > >Jeb Campbell >jebc@c4solutions.net >Cell: 865-385-1437 > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Jeb Campbell
2004-Mar-29 09:17 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR) (update)
On Mar 29, 2004, at 11:06 AM, Eric Wieling wrote:> Jeb Campbell wrote: > >> Anyway, the only stuff off list was trying to debug the connection. >> 1. With a crossover there is no sync (YELLOW and RED alarms) >> 2. With standard cable I get a pri error that they think they are the >> NET, but we are the NET. >> (This is asterisk 1.0 stable and the directions from voip-info) > > If they think they are NET then make Asterisk CPE, if they think they > are CPE then make Asterisk NET.Tried it both ways (and changing the Avaya, then both ways again). No dice. Jeb Campbell jebc@c4solutions.net Cell: 865-385-1437
James Golovich
2004-Mar-30 11:19 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR) (update)
On Mon, 29 Mar 2004, Eric Wieling wrote:> Jeb Campbell wrote: > > > Anyway, the only stuff off list was trying to debug the connection. > > 1. With a crossover there is no sync (YELLOW and RED alarms) > > 2. With standard cable I get a pri error that they think they are the > > NET, but we are the NET. > > (This is asterisk 1.0 stable and the directions from voip-info) > > If they think they are NET then make Asterisk CPE, if they think they > are CPE then make Asterisk NET.Another possibility is that the interface is looped back so the NET packets it sees are the ones asterisk sends out and gets looped back James
Jeb Campbell
2004-Mar-30 12:36 UTC
[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR) (update)
On Mar 30, 2004, at 1:19 PM, James Golovich wrote:> Another possibility is that the interface is looped back so the NET > packets it sees are the ones asterisk sends out and gets looped back > > JamesHow can I see or test this? zttool has a loop feature, but I have no idea how to use it. Jeb Campbell jebc@c4solutions.net Cell: 865-385-1437
To all those that have been following this thread (and helping me) -- it is working. The TN767 (refurb, but I just found out) was bad. Ahhhhh. Plugged into another card that went to a Shiva dialup box -- and boom, right in. So to all trying this, I know you can set this up in no time flat (as long as your phone person is fast at setting up the routes). Anyway, if you have questions, feel free to email me -- I want to pass on the knowledge that so many here have helped with. Jeb Jeb Campbell jebc@c4solutions.net Cell: 865-385-1437