Yesterday I tried to connect an * server with an X100P card to an extension of an AT&T PBX. The X100P never could detect the line and always gave an alarm. Is there some special type of config that must be done to connect an FXO port to an extension of a PBX? -- Carlos Chavez Corporativo Lacer S.A. de C.V.
Carlos Chavez wrote:> Yesterday I tried to connect an * server with an X100P card to an > extension of an AT&T PBX. The X100P never could detect the line and always > gave an alarm. Is there some special type of config that must be done to > connect an FXO port to an extension of a PBX? >I had that exact same problem, and it turned out to be the wiring of the jumper I was using to the FXO port had the two leads reversed. Maybe worth a try? B.