Kyle Stone
2004-Mar-12 07:39 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fast busy?
I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan
Dan Austin
2004-Mar-12 18:17 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fast busy?
Check the codecs allowed. Cisco supports most, but in my tests I limited myself to G.711U. Another possibility, and one I seem to remember having is that the IP address of the gateway did not match the * server, and as such did not have access to the correct Calling Search Space and Media Resource Groups. Still codec choice seems the most likely. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Friday, March 12, 2004 6:40 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan
Kyle Stone
2004-Mar-15 08:16 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fast busy?
I tried that, to no avail. It does the same thing.. Places the call, and then the CCM hangsup 1.5 rings into it. . -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Friday, March 12, 2004 8:18 PM To: Kyle Stone Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? Check the codecs allowed. Cisco supports most, but in my tests I limited myself to G.711U. Another possibility, and one I seem to remember having is that the IP address of the gateway did not match the * server, and as such did not have access to the correct Calling Search Space and Media Resource Groups. Still codec choice seems the most likely. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Friday, March 12, 2004 6:40 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan
Dan Austin
2004-Mar-15 10:12 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fast busy?
I gave my test * server away, so I can no longer test it, but I do have copies of my configs. I did not make extensive changes to get it to work. I was using a slightly older oh323 release (0.5.6), but I don't know that would make a difference. I'd be glad to try an help further, but I'd need more information about your setup. Are the * server and CCM on the same subnet? What CSS is assigned to the CCM gateway? What frame size is CCM using for G711? Is * using the same? Did you make any changes to FastStart/h245 tunneling options in oh323.conf ? We can also take the discussion off list if no-one else would be interested. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Monday, March 15, 2004 7:17 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I tried that, to no avail. It does the same thing.. Places the call, and then the CCM hangsup 1.5 rings into it. . -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Friday, March 12, 2004 8:18 PM To: Kyle Stone Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? Check the codecs allowed. Cisco supports most, but in my tests I limited myself to G.711U. Another possibility, and one I seem to remember having is that the IP address of the gateway did not match the * server, and as such did not have access to the correct Calling Search Space and Media Resource Groups. Still codec choice seems the most likely. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Friday, March 12, 2004 6:40 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan
Dave Packham
2004-Mar-15 11:25 UTC
[Asterisk-Users] Cisco Call Manager and Asterisk and fast busy?
can we get a copy of your saved configs? Dave P>>> Dan_Austin@Phoenix.com 3/15/2004 10:12:10 AM >>>I gave my test * server away, so I can no longer test it, but I do have copies of my configs. I did not make extensive changes to get it to work. I was using a slightly older oh323 release (0.5.6), but I don't know that would make a difference. I'd be glad to try an help further, but I'd need more information about your setup. Are the * server and CCM on the same subnet? What CSS is assigned to the CCM gateway? What frame size is CCM using for G711? Is * using the same? Did you make any changes to FastStart/h245 tunneling options in oh323.conf ? We can also take the discussion off list if no-one else would be interested. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Monday, March 15, 2004 7:17 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I tried that, to no avail. It does the same thing.. Places the call, and then the CCM hangsup 1.5 rings into it. . -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Friday, March 12, 2004 8:18 PM To: Kyle Stone Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? Check the codecs allowed. Cisco supports most, but in my tests I limited myself to G.711U. Another possibility, and one I seem to remember having is that the IP address of the gateway did not match the * server, and as such did not have access to the correct Calling Search Space and Media Resource Groups. Still codec choice seems the most likely. Dan -----Original Message----- From: Kyle Stone [mailto:kstone@teledvance.com] Sent: Friday, March 12, 2004 6:40 AM To: Dan Austin Cc: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk and fast busy? I got the latest oh323, and the libraries. I got everything installed and working.. somewhat. I setup netmeeting and can call IAXcomm extensions I setup. I also can place calls in the reverse. When I use either to route a call to CCM, setup as per you described.. The CCM/skinny phone will ring one and a half times and hangup. If answered before the end of the ringing I get a fast busy. Any ideas? Kyle Stone -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Monday, March 08, 2004 12:04 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Cisco Call Manager and Asterisk? In CCM add a Gateway. Use H.323 with H.225 as the device protocol. Next add a route pattern to identify which calls to direct to *. Lastly use chan_oh323 instead of chan_h323, as the former works with CCM and the later does not (one way audio). The setup is extremely easy and works just fine, with the correct channel that is. Dan _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users