Hi all - I'm testing an ISDN controller in NT-mode (PSTN mode). I plug my ISDN phone into the outlet of this device. With "en bloc dialing" I'm able to use the extensions of the Asterisk and the call is routed. It works fine. My Problem - when I try "normal" dialing, digit after digit - Asterisk (chan_capi.c) shows the error: "did not find device for msn = s " cli capi debug info (immediately before the error) shows: ------ NOTICE[81926]: File chan_capi.c, Line 1846 (capi_handle_msg): CONNECT_IND ID=001 #0x8006 LEN=0040 Controller/PLCI/NCCI = 0x101 CIPValue = 0x10 CalledPartyNumber = default CallingPartyNumber = <01 80>11 ; Outgoing MSN of my ISDN phone CalledPartySubaddress = default CallingPartySubaddress = default BC = <80 90 a3> LLC = default HLC = <91 81> AdditionalInfo BChannelinformation = <00 00> Keypadfacility = default Useruserdata = default Facilitydataarray = default ------ The ISDN controller is a GERDES primux 2S0 (2BRI) (NT-Version) any hints? mfg - Jochen L?thje mailto:jluethje@nikotel.de