cveazey@blackhillsfiber.com
2004-Mar-03 16:01 UTC
[Asterisk-Users] wct1xxp module and the T100P
I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the "lsmod" command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Thanks in advance! chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040303/e4c29922/attachment.htm
On Wed, 2004-03-03 at 17:01, cveazey@blackhillsfiber.com wrote:> I'm having trouble turning up a PRI to a T100P. I've read on the > Digium FAQ's that once the wct1xxp module is loaded correctly, the LED > on the T100P will flash red. I believe I've loaded the module > correctly because both wct1xxp and zaptel are listed when I do the > "lsmod" command. The LED on the card does not flash on and off. Does > anyone have any recommendations on what I could be doing wrong?Could be wrong or bad cable, could be incorrect configuration, could be no service on the line yet. Must provide data to get information. -- Steven Critchfield <critch@basesys.com>
On Wed, 3 Mar 2004 cveazey@blackhillsfiber.com wrote:> I'm having trouble turning up a PRI to a T100P. I've read on the Digium > FAQ's that once the wct1xxp module is loaded correctly, the LED on the > T100P will flash red. I believe I've loaded the module correctly because > both wct1xxp and zaptel are listed when I do the "lsmod" command. The LED > on the card does not flash on and off. Does anyone have any > recommendations on what I could be doing wrong?Switch type, line code, framing all matter. How about posting your config? -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567
cveazey@blackhillsfiber.com
2004-Mar-03 16:16 UTC
[Asterisk-Users] wct1xxp module and the T100P
Steven Critchfield <critch@basesys.com> Sent by: asterisk-users-admin@lists.digium.com 03/03/2004 04:06 PM Please respond to asterisk-users To: asterisk-users@lists.digium.com cc: Subject: Re: [Asterisk-Users] wct1xxp module and the T100P On Wed, 2004-03-03 at 17:01, cveazey@blackhillsfiber.com wrote:> I'm having trouble turning up a PRI to a T100P. I've read on the > Digium FAQ's that once the wct1xxp module is loaded correctly, the LED > on the T100P will flash red. I believe I've loaded the module > correctly because both wct1xxp and zaptel are listed when I do the > "lsmod" command. The LED on the card does not flash on and off. Does > anyone have any recommendations on what I could be doing wrong?Could be wrong or bad cable, could be incorrect configuration, could be no service on the line yet. Must provide data to get information. -- Steven Critchfield <critch@basesys.com> __________________________________________________________________ I know the PRI is good to the RJ-45 right before it goes into the T100P; I've made calls on it with our T-Berd. So I'm sure the cable is ok and there is service on the line. I haven't run Asterisk yet; shouldn't the card look "alive" once its driver module is loaded? Thanks! chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040303/efa1b84a/attachment.htm
cveazey@blackhillsfiber.com
2004-Mar-03 16:28 UTC
[Asterisk-Users] wct1xxp module and the T100P
Andrew McRory <amcrory@linuxsys.com> Sent by: asterisk-users-admin@lists.digium.com 03/03/2004 04:11 PM Please respond to asterisk-users To: asterisk-users@lists.digium.com cc: Subject: Re: [Asterisk-Users] wct1xxp module and the T100P On Wed, 3 Mar 2004 cveazey@blackhillsfiber.com wrote:> I'm having trouble turning up a PRI to a T100P. I've read on the Digium> FAQ's that once the wct1xxp module is loaded correctly, the LED on the > T100P will flash red. I believe I've loaded the module correctlybecause> both wct1xxp and zaptel are listed when I do the "lsmod" command. TheLED> on the card does not flash on and off. Does anyone have any > recommendations on what I could be doing wrong?Switch type, line code, framing all matter. How about posting your config? -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567 _______________________________________________________________________________ Sure: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf: [channels] context=cyperpri switchtype=national pridialplan=unknown signalling=pri_cpe channel=>1-23 Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded? Thanks! chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040303/e94a3799/attachment.htm
Man your email client is borked! zaptel looks good. try removing pridialplan=unknown and add group=1. -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567
cveazey@blackhillsfiber.com
2004-Mar-03 16:53 UTC
[Asterisk-Users] wct1xxp module and the T100P
> > On Wed, 2004-03-03 at 17:01, cveazey@blackhillsfiber.com wrote: > > I'm having trouble turning up a PRI to a T100P. I've read on the > > Digium FAQ's that once the wct1xxp module is loaded correctly, the > LED > > on the T100P will flash red. I believe I've loaded the module > > correctly because both wct1xxp and zaptel are listed when I do the > > "lsmod" command. The LED on the card does not flash on and off. > Does > > anyone have any recommendations on what I could be doing wrong? > > Thanks! > > chris > > > > Could be wrong or bad cable, could be incorrect configuration, could > be > no service on the line yet. > > Must provide data to get information. > -- > Steven Critchfield <critch@basesys.com> > > > __________________________________________________________________ > > I know the PRI is good to the RJ-45 right before it goes into the > T100P; I've made calls on it with our T-Berd. So I'm sure the cable > is ok and there is service on the line. > > I haven't run Asterisk yet; shouldn't the card look "alive" once its > driver module is loaded? > Thanks! > ChrisNope, What would answer the request placed on the line. BTW, please see about putting some sane configuration options in your mailer. I know Lotus is notoriously crappy when viewed by other readers, but that was really bad. -- Steven Critchfield <critch@basesys.com> __________________________________________________________________________________ Steven, Perhaps I should have posted my question differently to the list: After installing the CVS version of Asterisk, I type, "modprobe xct1xxp." The machine accepts the command but the LED on the T100P does not flash. How do I know that the T100P module has loaded correctly? (What sort of mailer config options do you recommend?) Thanks! chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040303/d3472e0b/attachment.htm
> Steven, > > Perhaps I should have posted my question differently to the list: > > After installing the CVS version of Asterisk, I type, "modprobe xct1xxp." > The machine accepts the command but the LED on the T100P does not flash. > How do I know that the T100P module has loaded correctly?Do you see any errors showing up in the output from "dmesg"?
cveazey@blackhillsfiber.com
2004-Mar-03 18:19 UTC
[Asterisk-Users] wct1xxp module and the T100P
<FONT face="Default Sans Serif, Verdana, Arial, Helvetica, sans-serif" size=2><FONT face="OCR A Extended"><DIV><BR>>> Perhaps I should have posted my question differently to the list:<BR>>><BR>>> After installing the CVS version of Asterisk, I type, "modprobe xct1xxp."<BR>>> The machine accepts the command but the LED on the T100P does not flash.<BR>>> How do I know that the T100P module has loaded correctly?<BR></DIV><DIV> </DIV><DIV><BR>Do you see any errors showing up in the output from "dmesg"?</DIV><DIV> </DIV><DIV></FONT><BR>__________________________________________________________</DIV><DIV>James,</DIV><DIV> </DIV><DIV>That output looks good. The last three lines read,</DIV><DIV> </DIV><DIV>"Zapata Telephony Interface Registered on major 196</DIV><DIV>Framer: DS21552, Revision: 3 (T1)</DIV><DIV>Found a Wildcard: Digium Wildcard T100P T1/PRI"</DIV><DIV> </DIV><DIV> </DIV><DIV><BR>chris</DIV><DIV> </DIV></FONT>