tad
2004-Mar-01 22:01 UTC
[Asterisk-Users] Re: Asterisk-Users digest, Vol 1 #2958 - 13 msgs
Ron - your best bet will probably to launch an agi script at exten => h,1 that initiates a new call using either a .call file or the manager interface. there are several messages detailing how to use both options on the wiki and in the archives. good luck, tad > --__--__--> > Message: 7 > From: "Rana Dutt" <rdutt@yahoo.com> > To: <asterisk-users@lists.digium.com> > Subject: RE: [Asterisk-Users] Dialing out after caller leaves message > Date: Sun, 29 Feb 2004 23:55:57 -0500 > Reply-To: asterisk-users@lists.digium.com > > The following suggested sequence does not work: > > exten => 100, 1, Dial(SIP/100, 15) > exten => 100, 2, Voicemail(u100) > exten => h,1,Dial(Zap/g1/CELL_PHONE) > > The Dial command in the 3rd step will fail because the channel it uses to > dial out on has hung up already! For example, if extension 101 leaves a > message for ext. 100 and then hangs up, the first two steps above get > executed, but after 101 hangs up, there is no "current channel" for Dial to > use to place the call to the cell phone. > > Can anyone see a way to make Asterisk dial a new call on its own after the > original caller has hung up? Do I need an AGI script to do this? Thanks, > > -Ron > >