This doesn't seem to be it, maybe its the definity release I am using but
this seems to be set up properly. There must be a flag elsewhere that
doesn't pass internal extentions cid informaiton. Any more suggestions?
Matt
-----Original Message-----
From: htguy [mailto:htguy@patriottelecom.com]
Sent: Thursday, February 26, 2004 10:31 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Lucent Definity CallerID {Scanned}
Ok, I Clipped this from the tek-tips forum for definity and thought it
might help you with your definity CID issue.
FYI the url I got it from is
http://www.tek-tips.com/gviewthread.cfm/lev2/9/lev3/89/pid/690/qid/742640
-Art
r3jnp1 (Programmer) Jan 22, 2004
Can you send me that email (jpagans@carilion.com) with the
instructions on how to send your DID number to the far ends caller ID
CaNNaBiS (TechnicalUser) Jan 22, 2004
I will tell you how. Its pretty easy.
OK, for example, my extension is 349.
My DID number is 716-897-7349. (notice the last 3 digits of my
DID number match my extension number)
I want 716-897-7349 to show up on the users CID unit.
So I do:
change isdn pub
I make the entry:
Ext Len: 3 (number of digits in my extension)
Ext Code: 3 (the first digit of my extension)
Trk Grp: 12 (my ISDN trunk group)
CPN Prefix: 7168977 (the part I want added to the beginning of
my extension on the CID unit)
CPN Len: 10 (the total number of digits to be displayed on the
CID)
FYI, CID is Caller-ID unit.
#Definity on Efnet
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040227/74689bb7/attachment.htm
I did come across a PDF explaining how to set up a cisco 3600 series gateway
with a Definity. Maybe it would help. Here is the link
http://www.cisco.com/application/pdf/en/us/guest/products/ps278/c1237/ccmigration_09186a00800e7631.pdf
-Art
----- Original Message -----
From: "Matthew Branton" <mbranton@xtracard.com>
To: <asterisk-users@lists.digium.com>
Sent: Friday, 2004-February-27 10:52
Subject: RE: [Asterisk-Users] Lucent Definity CallerID {Scanned}
> This doesn't seem to be it, maybe its the definity release I am using
but
> this seems to be set up properly. There must be a flag elsewhere that
> doesn't pass internal extentions cid informaiton. Any more suggestions?
>
> Matt
>
> -----Original Message-----
> From: htguy [mailto:htguy@patriottelecom.com]
> Sent: Thursday, February 26, 2004 10:31 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Lucent Definity CallerID {Scanned}
>
>
> Ok, I Clipped this from the tek-tips forum for definity and thought it
> might help you with your definity CID issue.
> FYI the url I got it from is
> http://www.tek-tips.com/gviewthread.cfm/lev2/9/lev3/89/pid/690/qid/742640
>
> -Art
>
> r3jnp1 (Programmer) Jan 22, 2004
> Can you send me that email (jpagans@carilion.com) with the
> instructions on how to send your DID number to the far ends caller ID
>
>
> CaNNaBiS (TechnicalUser) Jan 22, 2004
> I will tell you how. Its pretty easy.
>
> OK, for example, my extension is 349.
> My DID number is 716-897-7349. (notice the last 3 digits of my
> DID number match my extension number)
>
> I want 716-897-7349 to show up on the users CID unit.
>
> So I do:
> change isdn pub
>
> I make the entry:
> Ext Len: 3 (number of digits in my extension)
> Ext Code: 3 (the first digit of my extension)
> Trk Grp: 12 (my ISDN trunk group)
> CPN Prefix: 7168977 (the part I want added to the beginning of
> my extension on the CID unit)
> CPN Len: 10 (the total number of digits to be displayed on the
> CID)
>
> FYI, CID is Caller-ID unit.
> #Definity on Efnet
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
Yeah this combined with the earlier information did it, I think most of the
confusion stemmed from running definity release 6. Now it works though, its
too bad it can't be set on a per trunk basis though. Thanks very much for
the help,
Matt
-----Original Message-----
From: htguy [mailto:htguy@patriottelecom.com]
Sent: Friday, February 27, 2004 11:24 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Lucent Definity CallerID {Scanned}
I did come across a PDF explaining how to set up a cisco 3600 series gateway
with a Definity. Maybe it would help. Here is the link
http://www.cisco.com/application/pdf/en/us/guest/products/ps278/c1237/ccmigr
ation_09186a00800e7631.pdf
-Art
----- Original Message -----
From: "Matthew Branton" <mbranton@xtracard.com>
To: <asterisk-users@lists.digium.com>
Sent: Friday, 2004-February-27 10:52
Subject: RE: [Asterisk-Users] Lucent Definity CallerID {Scanned}
> This doesn't seem to be it, maybe its the definity release I am using
but
> this seems to be set up properly. There must be a flag elsewhere that
> doesn't pass internal extentions cid informaiton. Any more suggestions?
>
> Matt
>
> -----Original Message-----
> From: htguy [mailto:htguy@patriottelecom.com]
> Sent: Thursday, February 26, 2004 10:31 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [Asterisk-Users] Lucent Definity CallerID {Scanned}
>
>
> Ok, I Clipped this from the tek-tips forum for definity and thought it
> might help you with your definity CID issue.
> FYI the url I got it from is
> http://www.tek-tips.com/gviewthread.cfm/lev2/9/lev3/89/pid/690/qid/742640
>
> -Art
>
> r3jnp1 (Programmer) Jan 22, 2004
> Can you send me that email (jpagans@carilion.com) with the
> instructions on how to send your DID number to the far ends caller ID
>
>
> CaNNaBiS (TechnicalUser) Jan 22, 2004
> I will tell you how. Its pretty easy.
>
> OK, for example, my extension is 349.
> My DID number is 716-897-7349. (notice the last 3 digits of my
> DID number match my extension number)
>
> I want 716-897-7349 to show up on the users CID unit.
>
> So I do:
> change isdn pub
>
> I make the entry:
> Ext Len: 3 (number of digits in my extension)
> Ext Code: 3 (the first digit of my extension)
> Trk Grp: 12 (my ISDN trunk group)
> CPN Prefix: 7168977 (the part I want added to the beginning of
> my extension on the CID unit)
> CPN Len: 10 (the total number of digits to be displayed on the
> CID)
>
> FYI, CID is Caller-ID unit.
> #Definity on Efnet
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040227/7480ea5f/attachment.htm