asterisk users - Feb 2004 - T1 inbound dialplan

Hello everyone,

I'm trying to setup the T1 line with T100P card but could not get it accepts
inbound calls.  I only got busy signal.  Anyone know what would be the dialplan
(extension.conf) to accept T1 line calls.

Thanks.

-Tri.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040224/2afcf678/attachment.htm

here is a working config for a fractional PRI T1:

in /etc/zaptel.conf:
   span=1,0,0,esf,b8zs   # the chan bank
   fxsks=1-8		# FXO cards
   fxoks=9-24		# FXS cards
   span=2,1,0,esf,b8zs	# the PRI
   bchan=40-47		# channels 16-23
   dchan=48		# channel 24

in /etc/asterisk/zapata.conf
   ... chan bank channels
   context=<yourcontext>
   signalling=pri_cpe	; on the customer premise side of the T1
   group=2
   channel=> 40-47	; channels 16-23 on the T1

in /etc/asterisk/extensions.conf
   exten => 1160,1,Wait(1)		; main number
   exten => 1160,2,Goto(<1160context>,s,1) ; go to old FXO context
   exten => 1265,1,Wait(1)		; another main number
   exten => 1265,2,Goto(<1265context>,s,1)
   exten => 8080,1,Wait(1)		; the first DID number
   exten => 8080,2,Dial(Zap/9,15,t)	; dial the extension set
   exten => 8080,3,Voicemail...
   etc.

Note that I get only the last four digits from my CLEC--yours may be 
different.  You can enter "pri debug span <n>" at the console to
see the
incoming messages.

Cheers


Tri Tu wrote:
> 
> Hello everyone,
>  
> I'm trying to setup the T1 line with T100P card but could not get it 
> accepts inbound calls.  I only got busy signal.  Anyone know what would 
> be the dialplan (extension.conf) to accept T1 line calls.
>  
> Thanks.
>  
> -Tri.
-- 
Michael Welter
Introspect Consulting, Inc.
Denver, Colorado
+1 303 674 2575
mike@introspect.com
www.introspect.com