Hello all, I finally got around to installing my Dev Kit Lite. I did the install yesterday from the latest CVS. I am receiving an error that does not let * start up. When I go through the procedure to load the modules, I get the following error after running ztcfg. Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels configured. ZT_CHANCONFIG failed on channel 2: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? I looked in the archives but could not find a valid solution. The config file is: fxoks=1 fxsks=2 loadzone=us defaultzone=us When I did this with only the 100 card, it did work, but that was on a CVS release from last week. I ran the astinstall script and un-tarred the configs into / Any help would be appreciated. Thanks, Tom Schaefer