I am beginning a project to integrate * with a Cisco AS5350 gateway for inbound/outbound termination. If anyone has experience with this, what channel type would you recommend? H.323, SIP or MGCP? I've scoured the archives to see what channel type would be the most stable but haven't found a definitive answer. Also, if anyone has dealt with this setup before and would be willing to share an example config (cisco & *), that would be much appreciated! Thanks. -- Eric Merkel MetaLINK Technologies, Inc.
I use SIP to/from our AS5300... H.323 didn't work well for me... Also... be aware the the AS53XX access servers will NOT do VoIP to VoIP calls... it will do PSTN-to-VoIP or VoIP-to-PSTN just fine.. Your Asterisk configuration will become quite intricate.... especially with authentication and accounting. ----- Original Message ----- From: "Eric Merkel" <merkel@metalink.net> To: <asterisk-users@lists.digium.com> Sent: Sunday, February 22, 2004 3:38 PM Subject: [Asterisk-Users] Cisco AS5350 Gateway Intergration> I am beginning a project to integrate * with a Cisco AS5350 gateway for > inbound/outbound termination. If anyone has experience with this, what > channel type would you recommend? H.323, SIP or MGCP? > > I've scoured the archives to see what channel type would be the most > stable but haven't found a definitive answer. > > Also, if anyone has dealt with this setup before and would be willing to > share an example config (cisco & *), that would be much appreciated! > > Thanks. > > -- > Eric Merkel > MetaLINK Technologies, Inc. > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
SIP with G.711 for local lines or SIP with gsmfr for long disctance (slow connection). I used AS5350 several months with *, then i recieved my E100Ps and moved the Cisco to History (where all proprietary solutions must go). P.S. The Cisco is for selling for around 11K Euro (New, used in rack 4 months, 4E1s, 120DSPs) Eric Merkel wrote:>I am beginning a project to integrate * with a Cisco AS5350 gateway for >inbound/outbound termination. If anyone has experience with this, what >channel type would you recommend? H.323, SIP or MGCP? > >I've scoured the archives to see what channel type would be the most >stable but haven't found a definitive answer. > >Also, if anyone has dealt with this setup before and would be willing to >share an example config (cisco & *), that would be much appreciated! > >Thanks. > >