Hi all!!
I just downloaded and started tinkering with * a few days ago. This
program is unbelievable!!! I have some neat stuff working, but I have
one problem and a few questions.
The major problem I have is with my Cisco 7910. I have it registering
with the Skinny protocol, it gets and makes calls just fine. I also
have a Cisco 7960 using the SIP protocol, and it works REALLY good. I
can call the 7910 from it and the other way around.
Where I run into trouble is if the 7910 is off hook, if I dial the 7910,
* completely dies with little info as to why. Here is what displays on
the CLI:
*CLI> Found device: 331
-- skinny_call(Skinny/331@331-1)
Recieved Open Recieve Channel Ack
Segmentation fault
Ouch ... error while writing audio data: : Broken pipe
On another matter, I am not getting much useful information on how a
7960 should react to *. Questions:
Can the message light come on when voicemail is waiting?
The 7960(SIP)doesn't register with * like the 7910(Skinny) does. Is
this normal?
Digit translation doesn't happen realtime like the 7910 does. On the
7910, if I dial a 7, it immediately halts because there is no extension
that starts with a 7. Is this a function of the Dialplan.xml file?
Thanks for any input!!!
On Fri, 2004-02-20 at 10:22, Asterisk Jones wrote:> On another matter, I am not getting much useful information on how a > 7960 should react to *. Questions: > > Can the message light come on when voicemail is waiting? >Yes, you just need to add a mailbox= line to the sip.conf entry for the 7960> The 7960(SIP)doesn't register with * like the 7910(Skinny) does. Is > this normal? >By default the 7960 doesn't register at all, you need to add a command to the config file it tftp's down, or telnet in and set it, I forget what the command is off hand, cisco's site documents it.> Digit translation doesn't happen realtime like the 7910 does. On the > 7910, if I dial a 7, it immediately halts because there is no extension > that starts with a 7. Is this a function of the Dialplan.xml file? >Most likely. I have no experience with the 7910 or the skinny protocol, but the 7960 will collect digits until a matching entry from Dialplan.xml hits. Ryan Butler ADI Internet Solutions rbutler@adiis.net