asterisk users - Feb 2004 - Call File Troubles

Hi all,

I'm having a hard time getting my calls to complete when creating call files
and putting them in the /var/spool/asterisk/outgoing  directory.

Asterisk processes the file just fine, but the digits that enter my PSTN
switch are only 2 digits, not 10. For example:

Filename: 1.call (My call file)
Channel:Zap/g2/12125551212
MaxRetries:2
RetryTime:60
WaitTime:30
Context:office
Extension:100
Priority:1

extensions.conf
[office]
exten => 100,1,Dial(SIP/100)
exten => _1NXXNXXXXXX,1,Dial,Zap/g2/${EXTEN}

When I dial a number from my sip phone (extension 100) calls go out just
fine. But when I use a call file, only the first two digits of the
destination number are outpulsed, even though asterisk is saying otherwise.

Here is a snippet from the console:
*CLI>
    -- Attempting call on Zap/g2/12125551212 for 100@office:1 (Retry 1)
       > Channel Zap/25-1 was answered.
    -- Executing Dial("Zap/25-1", "SIP/100") in new stack
    -- Called 100
    -- SIP/100-7c33 is ringing
    -- SIP/100-7c33 answered Zap/25-1
  == Spawn extension (office, 100, 1) exited non-zero on 'Zap/25-1'
    -- Hungup 'Zap/25-1'
Feb 15 21:32:28 NOTICE[393235]: pbx_spool.c:206 attempt_thread: Call
completed to Zap/g2/12125551212

So here * is saying that it outpulsed 12125551212 but on my switch it only
recieved the digits12 (the first two digits of the number)

I am using the TE410P e&m wink signalling. Asterisk CVS-01/07/04

Any help is greatly appreciated.

TIA

-Seth

Hate to reply to my own post here, but it was a careless mistake on my part.
(My switch was giving imediate answer supervision on the inbound trunks)
Sorry for the trouble...

Thanks,
Seth

----- Original Message ----- 
From: "Asterisk" <mail_man@ipmotel.net>
To: <asterisk-users@lists.digium.com>
Sent: Sunday, February 15, 2004 9:25 PM
Subject: [Asterisk-Users] Call File Troubles

> Hi all,
>
> I'm having a hard time getting my calls to complete when creating call
files
> and putting them in the /var/spool/asterisk/outgoing  directory.
>
> Asterisk processes the file just fine, but the digits that enter my PSTN
> switch are only 2 digits, not 10. For example:
>
> Filename: 1.call (My call file)
> Channel:Zap/g2/12125551212
> MaxRetries:2
> RetryTime:60
> WaitTime:30
> Context:office
> Extension:100
> Priority:1
>
> extensions.conf
> [office]
> exten => 100,1,Dial(SIP/100)
> exten => _1NXXNXXXXXX,1,Dial,Zap/g2/${EXTEN}
>
> When I dial a number from my sip phone (extension 100) calls go out just
> fine. But when I use a call file, only the first two digits of the
> destination number are outpulsed, even though asterisk is saying
otherwise.
>
> Here is a snippet from the console:
> *CLI>
>     -- Attempting call on Zap/g2/12125551212 for 100@office:1 (Retry 1)
>        > Channel Zap/25-1 was answered.
>     -- Executing Dial("Zap/25-1", "SIP/100") in new
stack
>     -- Called 100
>     -- SIP/100-7c33 is ringing
>     -- SIP/100-7c33 answered Zap/25-1
>   == Spawn extension (office, 100, 1) exited non-zero on 'Zap/25-1'
>     -- Hungup 'Zap/25-1'
> Feb 15 21:32:28 NOTICE[393235]: pbx_spool.c:206 attempt_thread: Call
> completed to Zap/g2/12125551212
>
> So here * is saying that it outpulsed 12125551212 but on my switch it only
> recieved the digits12 (the first two digits of the number)
>
> I am using the TE410P e&m wink signalling. Asterisk CVS-01/07/04
>
> Any help is greatly appreciated.
>
> TIA
>
> -Seth
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>