Hello all- I have 3 TE410P cards in service in the field. Two of them have an regular problem that they get "stuck" during a system reboot. What I mean is that they display no LED's during any part of the restart, and they are not seen by the drivers during or after the reboot. The only thing that brings them back to life is to power down and restart the box they are in. Even pressing the reset button on the processor does not clear their state. This sounds very much like a hardware problem with the cards, since one would assume normally that a front panel reset would clear a stuck card. Has anyone else experienced these symptoms? This happens fairly regularly on two of the three TE410P cards. It does not happen with older cards such as the E400P, of which I have several. Thanks Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott@evtmedia.com URL: www.evtmedia.com
I had the same problem, Digium sent me a new card and now all is well. MATT--- -----Original Message----- From: Scott Stingel [mailto:scott@evtmedia.com] Sent: Wednesday, February 11, 2004 1:03 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] "Stuck" TE410P cards Hello all- I have 3 TE410P cards in service in the field. Two of them have an regular problem that they get "stuck" during a system reboot. What I mean is that they display no LED's during any part of the restart, and they are not seen by the drivers during or after the reboot. The only thing that brings them back to life is to power down and restart the box they are in. Even pressing the reset button on the processor does not clear their state. This sounds very much like a hardware problem with the cards, since one would assume normally that a front panel reset would clear a stuck card. Has anyone else experienced these symptoms? This happens fairly regularly on two of the three TE410P cards. It does not happen with older cards such as the E400P, of which I have several. Thanks Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott@evtmedia.com URL: www.evtmedia.com _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Scott Stingel wrote:>Hello all- > >I have 3 TE410P cards in service in the field. Two of them have an regular >problem that they get "stuck" during a system reboot. What I mean is that >they display no LED's during any part of the restart, and they are not seen >by the drivers during or after the reboot. > >The only thing that brings them back to life is to power down and restart >the box they are in. Even pressing the reset button on the processor does >not clear their state. > >This sounds very much like a hardware problem with the cards, since one >would assume normally that a front panel reset would clear a stuck card. >Has anyone else experienced these symptoms? This happens fairly regularly >on two of the three TE410P cards. It does not happen with older cards such >as the E400P, of which I have several. >Do pci read cycles show anything in the slot? Does pci id come back as all 1's or 0's or just some invalid number? Gee, the price on those sip gateways don't seem quite so high now. have fun, bk..... -- Bob Knight [-w] the work option bk@minusw.com 925-449-9163
Yup we see that somes times on dell2650, need to power cycle to come again on a Dell 1650 do you also get no interrupts cat /proc/interrupts i had a bug note on it here http://bugs.digium.com/bug_view_page.php?bug_id=0000707 http://bugs.digium.com/bug_view_page.php?bug_id=0000708 we sent that card back .. ----- Original Message ----- From: "Scott Stingel" <scott@evtmedia.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, February 11, 2004 10:03 AM Subject: [Asterisk-Users] "Stuck" TE410P cards> Hello all- > > I have 3 TE410P cards in service in the field. Two of them have anregular> problem that they get "stuck" during a system reboot. What I mean is that > they display no LED's during any part of the restart, and they are notseen> by the drivers during or after the reboot. > > The only thing that brings them back to life is to power down and restart > the box they are in. Even pressing the reset button on the processor does > not clear their state. > > This sounds very much like a hardware problem with the cards, since one > would assume normally that a front panel reset would clear a stuck card. > Has anyone else experienced these symptoms? This happens fairly regularly > on two of the three TE410P cards. It does not happen with older cardssuch> as the E400P, of which I have several. > > Thanks > > Scott M. Stingel > Emerging Voice Technology Inc. > Palo Alto, California and London, England > Email: scott@evtmedia.com > URL: www.evtmedia.com > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users