Hi, I recently received my development kit with 1 x100p and one tdm400p (1) fxs port. I installed everything from the digium disk that i received with my kit, however, i dont; know what to do next. I would like to be able to call through the internet using xten (pc2phone) and terminate the call in my gateway. anyone has a standard setup ? thanks, Francisco ----- Original Message ----- From: "Steven E. Frazier" <sfrazier@fraziercorp.com> To: <asterisk-users@lists.digium.com> Sent: Friday, February 06, 2004 12:30 AM Subject: [Asterisk-Users] Adding another X100P after X100P and TDM400P is already configured> History: > > 1. Added X100P to my system > 2. Added TDM400P (2 port) > > Worked fine so far > > 3. Now I want to add an additional X100P > > Is the following configs files ok and is there any issue with adding the > X100P (channel 4) after my 2 analog FXS channels? > > Thanks. > > Steve > > > > Here is my /etc/zaptel.conf > > fxsks=1,4 > fxols=2-3 > loadzone = us > defaultzone = us > > > Here is my /etc/asterisk/zapata.conf > > ; Zapata telephony interface sample configuration file > ; > [channels] > ; > ; X100P plugged into PSTN > ; X100P # 1 > context=incoming > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel => 1 > ; > ; > ; > ; TDM200B Port #1 plugged into analog Phone > ; > ; > context=toll-access > signalling=fxo_ls > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > musiconhold=default > usecallerid=yes > callerid="Livingroom" <2201> > mailbox=2201 > channel => 2 > ; > ; TDM200B Port #2 > ; > ; > context=toll-access > signalling=fxo_ls > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > musiconhold=default > usecallerid=yes > callerid="Kitchen" <2202> > mailbox=2202 > channel => 3 > > ; X100P # 2 > context=incoming > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel => 4 > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Steven E. Frazier
2004-Feb-05 21:30 UTC
[Asterisk-Users] Adding another X100P after X100P and TDM400P is already configured
History: 1. Added X100P to my system 2. Added TDM400P (2 port) Worked fine so far 3. Now I want to add an additional X100P Is the following configs files ok and is there any issue with adding the X100P (channel 4) after my 2 analog FXS channels? Thanks. Steve Here is my /etc/zaptel.conf fxsks=1,4 fxols=2-3 loadzone = us defaultzone = us Here is my /etc/asterisk/zapata.conf ; Zapata telephony interface sample configuration file ; [channels] ; ; X100P plugged into PSTN ; X100P # 1 context=incoming signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived channel => 1 ; ; ; ; TDM200B Port #1 plugged into analog Phone ; ; context=toll-access signalling=fxo_ls callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no musiconhold=default usecallerid=yes callerid="Livingroom" <2201> mailbox=2201 channel => 2 ; ; TDM200B Port #2 ; ; context=toll-access signalling=fxo_ls callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no musiconhold=default usecallerid=yes callerid="Kitchen" <2202> mailbox=2202 channel => 3 ; X100P # 2 context=incoming signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived channel => 4
Brian West
2004-Feb-05 22:01 UTC
[Asterisk-Users] Adding another X100P after X100P and TDM400P is already configured
if you load wcfxo first then wcfxs its like this: fxsks=1-2 fxols=3-4 reverse if you load wcfxs first. bkw On Thu, 5 Feb 2004, Steven E. Frazier wrote:> History: > > 1. Added X100P to my system > 2. Added TDM400P (2 port) > > Worked fine so far > > 3. Now I want to add an additional X100P > > Is the following configs files ok and is there any issue with adding the > X100P (channel 4) after my 2 analog FXS channels? > > Thanks. > > Steve > > > > Here is my /etc/zaptel.conf > > fxsks=1,4 > fxols=2-3 > loadzone = us > defaultzone = us > > > Here is my /etc/asterisk/zapata.conf > > ; Zapata telephony interface sample configuration file > ; > [channels] > ; > ; X100P plugged into PSTN > ; X100P # 1 > context=incoming > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel => 1 > ; > ; > ; > ; TDM200B Port #1 plugged into analog Phone > ; > ; > context=toll-access > signalling=fxo_ls > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > musiconhold=default > usecallerid=yes > callerid="Livingroom" <2201> > mailbox=2201 > channel => 2 > ; > ; TDM200B Port #2 > ; > ; > context=toll-access > signalling=fxo_ls > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > musiconhold=default > usecallerid=yes > callerid="Kitchen" <2202> > mailbox=2202 > channel => 3 > > ; X100P # 2 > context=incoming > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel => 4 > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >