asterisk users - Dec 2003 - DIAX, chan_capi and busy tone

Good day,

I am using DIAX (with IAX(1)) and try to call out using chan_capi via a 
AVM C4 card.

This mostly works, but there are two problems:

1) No busy detection
2) double ringing, i.e. first I hear the generated ringtone by IAX, 
after that the ringing tone generated by the phone company (or whoever 
is reponsible for the regular ringing tone when you wait for someone to 
pickup.)

I know I can circumvent 2) by first answering the call with in the 
dial-out statement, but this seems to me to be the wrong way to go about it.

Any and all help is greatly appreciated.
--
Best regards

Peer Oliver Schmidt
the internet company

Hi,
>----- Original Message ----- 
>From: "Peer Oliver schmidt" <posde@theinternet.de>
>...
> I am using DIAX (with IAX(1)) and try to call out using chan_capi via a
> AVM C4 card.
>
> This mostly works, but there are two problems:
>
> 1) No busy detection
This is something which must be implemented in the channel, not in the soft
phone,which then provide that info to the client (phone).
> 2) double ringing, i.e. first I hear the generated ringtone by IAX,
> after that the ringing tone generated by the phone company (or whoever
> is reponsible for the regular ringing tone when you wait for someone to
> pickup.)
If the channel is not answered, then you hear the DIAX tone too.
With X100, when the external line is dialed and connected (but not
answered), you will hear just the phone line ring tone.
>
> I know I can circumvent 2) by first answering the call with in the
> dial-out statement, but this seems to me to be the wrong way to go about
it.
This is standard for X100P. I do not know how chan_Capi works. It passed the
audio stream when connected and  not answered?

Best regards,
Dan