asterisk@hamel.net
2003-Dec-11 16:42 UTC
[Asterisk-Users] ZT_CHANCONFIG failed on channel 2
Hi, I am in the process of working with my first asterisk box. It is configured with 1 FXO and 1 FXS port so I can test (play) with it. About once a day it seems as though the FXS card goes brain dead. At least that is what I think is happening because when I pick up the analog phone there is no dial tone. When I stop the zaptel service and then start it I get the following error. [root@asterisk asterisk]# service zaptel stop Unloading zaptel hardware drivers: wcusb wcfxo Removing zaptel module: [ OK ] [root@asterisk asterisk]# service zaptel start Loading zaptel framework: [ OK ] Loading zaptel hardware modules: wcfxo wcusb Running ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) [FAILED] Shorlty after this message the box looses network connectivity, I cannot ping it but I do have access from the console but still no network. FWIW, ifconfig -a shows the interface "up" I am currently running this version of * asterisk*CLI> show version Asterisk CVS-11/30/03-13:40:23 built by root@asterisk on a i686 running Linux And this fedora kernel linux-2.4.22-1.2129.nptl Any ideas ? Any help greatly appreciated. Thank you in advance, -Billh ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- This message has been scanned for viruses and dangerous content by the Bugs.Hamel.Net MailScanner, and appears to be clean.
On Thursday 11 December 2003 17:42, asterisk@hamel.net wrote:> [root@asterisk asterisk]# service zaptel start > Loading zaptel framework: [ OK ] > Loading zaptel hardware modules: wcfxo wcusb > Running ztcfg: ZT_CHANCONFIG failed on channel 2: No such device > or address (6) [FAILED]Typically this means that the driver cannot detect the device. Since it is the S100U that seems to be undetected, try unplugging it, waiting 20 seconds, and plugging it back in. -Tilghman